Discussion Locked

DHCP on Different Subnets

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This may be simple to some of you, but I haven't figured it out yet. I have a network that I am wanting to put different segments on and use DHCP. I currently have two segments. They are 192.168.0.1/254 and 192.168.1.1/254. My 1st segment has DHCP enabled on it. My 2nd segment is small and uses static IPs. I have approximately 10 servers on this network. The clients on segment 1 access all of the servers, but the clients on segment 2 only need to access 2 of the servers. I currently have 2 NICsin each server that requires access from both segments. They each have a static IP corresponding to the different segments. I do not have enough IP addresses to put the 2nd segment in with the 1st one. I am wanting to enable DHCP on the 2nd segment without the clients from the 1st segment getting the addresses. The 2 servers that need access from both segments are running NT4 and my DHCP server is W2K. Any assistance would be appreciated. Thanks in advance.

4 replies

by r. a. caluste

I am assuming you have a router or a windows 2000 box configured as a router in between segments. Also, I am assuming the DHCP server is a separate server on segment 1. Enable DHCP relay on the widnows 2000 box configured on the router. If segment 2is small enough (just as you mentioned), create a reservation for the clients of segment 2. This would allow your DHCP server to serve a different scope

by jlbpotter

I do not have a router in between the segments or a server configured as a router. What I have is 2 NICs in both servers that need access from the segment 2. One NIC has an IP address for segment 1 and the other an IP address for segment 2. This allows the clients on segment 2 to access these servers. FYI, the clients on segment 2 are PCs in a manufacturing environment on production lines that only need to connect to a SQL database and another server that runs their app.

This discussion is closed to new replies.