Discussion Locked

DHCP Superscopes not working

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a problem in DHCP Superscopes. i have created 2 scopes 1 local scope & 1 superscope.
the IP Address of DHCP Server is 192.168.1.10
the scopes are like these
scope-1 192.168.12.0 to 192.168.12.100
Router : 192.168.12.1
this scope is added in Superscope. DHCP clients for which this scope is intended to is in remote subnet in branch office which is connected by routers. i have enabled DHCP RELAY AGENT on these routers.

my second scope is local scope which is
Scope-2 172.16.2.10 to 172.16.2.100
router : 172.16.2.1
this scope is not in superscope
now DHCP is not leasing any IP address from these scopes.

if i set the IP address of DHCP server to match the IP of Scope-2 i.e 172.16.2.2 then it leases out from scope-2. but scope-1 remains same its not assigning any IP to remote subnet nor to the local subnet.

whatz causing this ? can't we have 192.168.x.x assigned for DHCP server & let it assign ip of class b 172.16.x.x from its scope.

5 replies

by netuser

Enable dhcp relay agent on the local router otherwise you need a dhcp server.

by shaunjanzen

Are you using a network provider to connect to your remote site?

If you are, you will have to arrange with them to allow your DHCP to cross their routers as well.

This discussion is closed to new replies.