Discussion Locked

Direct cable connection

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I am trying to connect my desktop and laptop. I need someone to email me to walk me through this I'm giving all of my points (270) to who ever can help me. Please email me. My first problem is it keeps telling me that i haven't shared anything yet. Again, please email me

James

10 replies

by mike_fry

goto the network applet in control panel and check that you have file and printer sharing installed. then right click on the folder that you want the guest PC to see on the Server PC, goto sharing, share the folder and try again. It seems as though it is ready to go except that you haven't allowed any resources to be shared to the guest PC.

by todd o.

Microsoft explains the process pretty well on this page: http://www.microsoft.com/insider/windows98/articles/netdir.htm

Make sure you have the right kind of cable (null modem or parallel) and follow the directions--you should have no trouble.

If you need help determing the proper cable to use, have a look at this page: http://support.microsoft.com/support/kb/articles/Q142/3/24.ASP

If you go with a null modem serial cable, you can tweak your ports for optimum performance by follwing these instructions:
http://support.microsoft.com/support/kb/articles/q195/2/40.asp

If the above pages don't work perfectly for you, I suggest that you look to this page for trouble shooting advice: http://wwwcip.informatik.uni-erlangen.de/user/orknorr/windcc.html

Hope that helps.

by gbullers

If you double click on "my computer" then right click on the drive you want to share ( I assume drive c) the menu should include sharing, if so click on it click shared as & give it a name and set the access to Read & write & click ok. you may need to do this on both machines depending on what you want to do. If sharing isn't a choice on the menu then you need to go to control panel then network & enable file & print sharing. if both machines are not the same operating system one win98 & the other win95, you may also have a protocal problem by default the set up different protocals & one will need to be added to one machine. if you have any more problems email me & I'll try to help. good luck.

by xjpaulb

Hello!...regarding your problem i hope this will help you, Make sure both computer uses the same protocol install dial up adapter install tcp ip,netbuie,ipx/spx protocol and file and print sharing on both computer they should have the same protocolsto communicate, you can install dial up adapter from add remove program-windows setup-communication - then this will restart your computer, after it has restarted share a directory or the entire drive in the Host computer. check your serial cable that it is attached firmly on the parallel port of each comp. You can buy serial cable connector in any computer shop..
configure one computer as a Host and the other as a guest and share some folder at your host.

paul

by dejan

Start-Settings-ControlPanel-Network

Add-Protocol-Microsoft-netbeui
file and print sharing

then try find computer

win9x some time not refresh network fast, then try

start-find-computer

This discussion is closed to new replies.