9 replies
Try using the same workgroup in "Network Neighborhood"
Or they are just in diferent sub-nets (IP address)
by gypsyroo
by markchen
by gypsyroo
by gbullers
by gypsyroo
by gregzeng
The above 'answers' are not yet complete. I use TCP/IP on both PC's. Sharing has to be enable on the one PC that is 'slave' or client, only. The correct cable (Laplink-type) is essential, either parallel (printer-port, LPT) or serial (COM). But you must tell both machines that you are using either parallel or printer cable/ports.
There can be a time-out error from the server-type PC (used to access the drives of the other PC), so you have to press the ENTER keys on both PC's at about thesame time.
If I still have trouble, I run a DOS-box on both PC's, and check that they can connect in DOS, first (use Laplink, FastLinx, Norton Commander or the similar). Once I know that DOS works, then I know that Windows technically might be able to work.
The most common fault for me now is that the cables are not pushed in properly - usually the notebook pc is easily moved, dislodging the cable.
by gypsyroo
by gypsyroo
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending