9 replies
by jkaras
by lcw
by chris lowe
First, the obvious questions;
1) have you checked the "power saving" settings
to be certain the laptop is not shutting down to
conserve battery?
2) Is there a hardware overlap with IR or
serial ports using the same interrupt?
by lcw
by tech support
by lcw
by amet
Frequent disconnects can be caused by a number of things.
1-the length of the phone cord should be a maximum of 6 feet
2-Go into control panel, network, and on the configuration tab, under the following network components are installed, it should read client for microsoft networks, dial up adapter and tcp/ip dial up adaptor. Client for microsoft networks should also be set as the primary network logon.
If you are missing these components you can add them, however, some systems require the win 98SE disc, ensure you have before trying these steps.
If you are missing these components click on add and under manufacturer, select microsoft and under client select client for microsoft networks. Same for adapters, etc.
If that doesn't solve the problem, you can try to uninstall and reinstall your Dial up networking, however once again, ensure you have your win 98 disc if required. To do this you have to go into add/remove programs, windows setup, communications, details, uncheck dial up networking and restart the computer. Then go back into add/remove, windows setup, details and put the check back beside dial up networking, restart, follow prompts to insert win 98 disc (if required as some computer systems do not need to re-insert).
Telephone line noise or call waiting will also cause frequent disconnects. Be sure to disable call waiting. You can also ask your telephone provider to conduct a date transfer rate test on the line.
hope this helps
by lcw
by lcw
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending