Discussion Locked

disk failure mirrored drive need to boot from mirror

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a windows NT 4.0 server. Two physical hard drives that were mirrored (raid 1). The first drive failed and I need to boot from the second drive. I tryed to change the boot.ini to boot from disk 2, but receive non bootable disk error. help

5 replies

by psx

If you really were running RAID-1, you should not experience any downtime because your OS treats both drives as one. If one fails, the other will pick up right away. Then you go into the storage manager (or whatever RAID utility came with your RAID card) and view the status of the array. One of your drives will say "Optimal" signaling that it's the working drive. The other will say something like "Failed" and your array will say "Degraded". At that point you can choose to Rebuild the failed drive.

If you cannot boot to the array, then at boot time, access your RAID array manager (right after BIOS) and view the array there. Chances are both of your drives have failed or something else is going on. Check with your RAID card manufacturer.

by adnan

Since it is RAID 1, second drive should boot automatically. But even then it is not booting check the array status in the Controller.

This discussion is closed to new replies.