Question Locked

Display issues (see post for specifics) on HP laptop when on battery power

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello All!

My display will draw thin lines about 1 1/2 to 2 inches in length next to the mouse and will repeatedly turn on and off when running on battery power on ac it is completely fine. Battery is showing a full charge.

Is it possible that the battery can't provide enough power to my video card and yet be able to power the rest of the machine? I wouldn't think that there is anything wrong with the lcd itself or the board since it's fine on ac.

If anyone has any ideas I would certainly appreciate it. I want to have some idea what could be causing it before I talk to HP tech, we've already gone round with this laptop before when I did have a mobo problem.

Thanks!

11 replies

by robo_dev

Plug in an external monitor. If the same thing happens, then it's mobo or dc-dc board.

Does the symptom occur on bios setup screens? (rule out odd power settings, device drivers, etc).

Try it at different display brightness settings. (To see if it's a backlight inverter issue). Is the screen just going dark, or losing the whole video image (shine flashlight at screen to check).

Most laptops reduce backlight brightness of display on battery, so if the circuitry that does that function is bad (dc-dc board, mobo, backlight inverter), then symptoms will occur only on batt.

Some laptops have a separate dc-dc board that serves as an internal power regulator (some are built onto mobo).

Also the backlight invertor for the display is a very stressed part that fails often. That part is built into the display assembly.

by ddavis

the short thin lines occur even when posting. I can't imagine that the lines are a power related issue...

If it were the backlight inverter wouldn't I have the problem under ac power as well.

The blacklight is dimming on battery power but perhaps it's having trouble negotiating that change, but I wouldn't think that would be causing the lines on the display. I would think it would just fail to dim or go completely black?.?.?

by robo_dev

The 'lines' problem does not sound like backlight invertor, it sounds more like mobo/DC-DC board.

However, you never know.

The symptom sounds like a component is sending some serious interference...either something is spitting stray voltage to the mobo video section, or the signal cables to the display are getting interfered with.

The external monitor will tell us if it's a display/inverter/display cable problem, or a MOBO/DC-DC board problem, I believe.

The invertor is a VERY high power circuit board (converts ~12V to 25K volts), and it's directly behind the display on most laptops....therefore if it had a faulty component, it might be sending stray voltage around. Sometimes components might be happy at one voltage (brightness) setting, but totally unstable at a different brightness (voltage) setting.

Generally, when I see lines on a laptop display I think that the signal cable between the mobo and the display is damaged, and the lines will go away by jiggling the hinge of the machine.

If it's under warranty, yank the hard drive out and send it back. If somehow they want a drive in it, then make a ghost image of your drive and/or buy a $5 drive on ebay and slap it in.

by oh smeg

Don't bother with a HP Agent as they could attempt to tell you that this is normal. If you buy a new product you have a right to expect it to work properly and not be messed around so just send it back and continue to till you are happy with the unit.

But a warning here if the unit has been used [i]and had new software installed[/i] HP will wipe the HDD and re image it to check that some software installed hasn't caused the problem so make sure that you have a Backup of all your Data before sending it in.

If the place that you send the NB to is unwilling at first to be cooperative just ask for a Refund or a Replacement Product. Also if you are not happy with the repair you have the right to ask for a Replacement/Refund.

Col

by ddavis

I've already had the mobo replaced and I had everything backed up before I sent it in. They wiped the drive and then nicely enough loaded it with Windows XP Home for me!! Then I couldn't even use my restore disks since they were for Pro.

It seems that the screen is going completely black though it's just for a second, not long enough for me to shine a flashlight on it.

Does the dc-dc board only supply power when on battery? If so, I'll put my money on that being the problem. This machine tends to run hot and I think it's really good at cooking itself.

I will try to hook up an external monitor tonight. This is on my personal laptop that pretty much just stays at home plugged into ac power and I never notice the problem until I travel and attempt to work on battery power.

Darcy

by oh smeg

the DC-DC Board on AC & DC I'll not repeat it again.

But just to add a bit of information the Inverter turns low Voltage to High Voltage and on Battery runs at a lower High Power Load to preserve Battery Life. So it may very well be the Inverter which works well at one voltage and corrupts the display at a lower voltage. It may even have been burnt and suffered some damage.

AS for the Heat Issue get a USB powered Cool Pad like this one

http://tinyurl.com/ny8zn

They do keep the unit cooler than they otherwise would be and help prolong the life of every NB. For Domestic life a NB Cooler is a must as NB's can be placed on surfaces that they where never designed to be on and this allows some table coverings or bed cloths to block the Air Intake/s for cooling. Having a Solid surface between the bottom of the NB and whatever surface it's on prevents this from happening. HDD's are generally speaking the hottest parts of any computer including NB's so every opportunity you can use to cool them down makes them last longer. The same applies to batteries as well but they don't get as hot as a HDD does.

The Cool Pads also have the added advantage of sucking air across the bottom of the NB and this pulls any Dirt/Dust in the air away from the NB's intakes so they also help to keep the Cooling System of the NB clean and working at Peak Efficiency.

Col

by robo_dev

Amazing how hot some of those beasts run...

In my experience I would say the failure rate of laptop drives is 5x that of desktop drives, and I would bet that heat is the reason.

I've found that by adding some self-adhesive rubber feet to the underside of the laptop can lift it up enough so it runs cooler. Especially for those old fuddy-duddies who use their laptop on a tablecloth or placemat.

by ddavis

I don't know why the graphics drivers would operate any differently depending on the power source but if I uninstall it everything is okay until I reinstall it. It hasn't been overheating too bad unless I burn alot of DVD's, I have the 12 cell battery which raises it up a bit so it's not lying flat on the desk anyhow and I am very heat conscious with it.

This discussion is closed to new replies.