Discussion Locked

DMZ and firewall in VLANs

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all,
We are planning to implement VLAN in our new network. Every workstation will be terminated to a switch port. This includes all machines even the ones in the DMZ and the firewall interfaces. For example, instead of having the firewall'sinternet interface connected back to back with the ISP's router, they will be logically interconnected via a VLAN.

I would like to know if this is asking for problems. Any chances of being hacked ? How about DoS attacks directed to the switch ?

Thanks in advance

5 replies

by turambar386

There is really nothing wrong with doing this. I've used this kind of set up in the past with no troubles.

Only real thing to keep in mind is to give the switch an IP address that is not in the DMZ or in the subnet/VLAN that is between the firewall and router. That will minimize the chances of anyone being able to attack the switch directly.

If you do that, give the switch a decent password, and ensure that there are no unpatched security vulnerabilities known about your switch, you should be fine.

by ryttinch

You would be fine doing this. We had a setup like that at the last company I worked for. It worked very well. You just have to make sure your firewall and switch are configured properly. I would also recommend using a VRRP technology so you don't have a single point of failure for your entire organization.

Chad Rytting

This discussion is closed to new replies.