My first thought is has it ever worked?
Disconnect from routers or switches and connect directly to the PC using the cables that came with the modem.
A few assumtions,
Your network card is working and has no problems in Device Manager. The light on the back of the card are illuminated.
A test for basic connectivity is to run the ping command to the local loop. Run the command prompt and type "ping 127.0.0.1". It should give a successful reply. Without passing this test your network card isn't working properly.
Run "winipcfg" and see if you're getting an IP address from the cable modem. Click Start, Run then type in winipconfig. If it shows PPP Adapter change to the network adapter from the dropdown.
Also select more info. There should be an IP address. Click "Release All" the IP addresses should change to zeros. Click on "Renew" and the addresses should come back.
Right click on network n-hood located on the desktop. Select properties. In the window there should at least be Client, adapter and protocol.
1.Client for Microsoft Networks
2.Dial up Adapter
3.Your Network Adapter
4.TCP/IP for the Dial up Adapter (protocol)
5.TCP/IP for your Network Adapter (protocol)
There could be more adapters and other protocols.
Select the properties for the network adapter and make sure its "bound to TCP/IP".
Select the proerties for TCP/IP for your network adapter. Click "IP Address" tab across the top and make sure "Obtain IP address automatically" is check. Click on the "DNS" tab. Choose "Disable DNS". Then do WINS and disable that.
After making changes the system will load files and reboot. If Win98 disk isn't available type C:\Windows\System or C:\Windows in the space provided for the path. It switches back and forth. So you may need to select between the 2 folders a couple of times. If a file can't be found look to the right and click "destination". Use the same path to where the file will be copied to.
After making changes to the ne