Discussion Locked

DNS FORWARDERS

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have just set up and installed the dns service on a Windows 2000 server,
DNS is to be primarilly used to conect to a remote client access server, which im pleased to say it does, but only when i have enabled forwarders. As i want the ip address resolved locally this is not ideal i have checked the cache log and all requestes are being cached locally, but when i remove the forward ip address i cannot conect.

Anyone any idea's

Thks

Jonathan

6 replies

by beermonster

Hi,
If we are talking about a single address, why not add it to the hosts file in system32\drivers\etc?

by jonathan.gray

I couold do that, but would it not indicate that
address's were being resolved remotely
as opposed to locally, i'm trying to reduce WAN traffic by resolving ip and host names locally.

Thks

by rabbit_runner

BeerMonster's answer is right-on-the-money. What the HOST file does is this....
By typing in a server name or URL name, the local computer / workstation first attempts to resolve the name by checking it's own cache. This cache is loaded from the HOSTS file when it boots up. Therefore there would not be any network traffic to resolve the name or address. The only traffic would be the computer connecting to the access server, and this is what you are wanting.

Another solution would be to add a static host in your DNS table. You would add the host name, the appropriate IP address, and also make certain you create a reverse look up entry. This will allow traffic to be on the local LAN to resolve the IP address of your access server.
Either of the above will work. Hope this helps.

This discussion is closed to new replies.