Discussion Locked

DOS Network Boot Disk

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do you create a DOS network boot disk running TCP/IP for 3COM 3C905B-TX cards? Trying to reload OS on WIN95B client in an NT 4 environment w/o CDROM. Need to map to another drive on the network for loading. Network Client Administrator?

11 replies

by borgjs

you need the DOS NIC drivers. I have e-mailed the Network boot disk to akjacks@polarisind.com. It is in zip format copy the content of the folder to a disk and you will have the network boot disk. If this is the wrong NIC drivers I know I have them some where e-mail me at jborg@lsnj.org and I will send the right ones. However I do believe these are correct.

by curlergirl

You need to use Network Administrator, AND you need to use the appropriate NIC drivers for the 3C905B cards. To do this you need to add the NIC drivers to your Network Client Administrator setup so that you can choose them when you're creating yournetwork boot disk. There is a good TechNet article on this, which you can probably find by going to www.microsoft.com/technet and looking up MS-DOS NDIS drivers. If you can't find it, email me at synergy@synoffsys.com and I'll email you back a copy of the article. Once you do this, you can create the boot disk through NW Client Administrator. Hope this helps!

by nettek

Don't use Disk Administrator. I believe it only supports a select number of older NIC cards, and I don't believe it offers a "have disk" option. Instead, go to the Client folder on the NT server installation CD-ROM. In the subdirectories you willfind network client disks for DOS (disk1 and disk2). Copy the contents of these folders to two seperate floppies.

Boot using a DOS boot disk, insert the network installation floppy disk 1 and run setup (or it might be install.exe, I can't recall). If you are using TCP/IP, the setup prefers to use DHCP by default, but you can install a static IP address. You can also use NetBEUI or IPX/SPX.

You can also add your own NIC driver. 3Com has the drivers on their web site. Disk two for the 3C905B cards (3c90xx2.exe) contains the DOS drivers. I believe they can be found in the DOS ODI directory.

by lister of smeg

I find it easier to use laplink..... nice and basic.... just connect your nt machine with a cdrom via a serial cable to your win95 wannabe machine and run a win95 boot disk let load laplink and copy the files across. From memory it takes about 10-15minutes to copy files for win95 and about 20mins for win98.

cheers... it you need the free copy of ll5 just email me...

Jamerson

This discussion is closed to new replies.