Discussion Locked

DOSE ANY ONE REPLACE THE PCI CHIP AND SOLDER IT

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
DOSE ANY ONE REPLACE THE PCI CHIP AND SOLDER IT SUCCESFULY ? I SAYED THAT BCUZ IFOUND MANY LAPTOS WITH BURNED CHIP I REPLASE IT WITH HOT AIR GUN BUT NO RESPONSE (THERE IS NO SHORT ON THE PINS). (SORY FOR MY POOR LANGUAGE)

2 replies

by mjd420nova

I've attempted about 20 of those type repairs and been only 50% successful. I've not tried a heat gun, just a low wattage(23 watts) soldering iron, and an ESD solder sucker. The unsuccessful attempts were as a result of bad plate-thru connections broken and blistered layers of the board caused by the cratering effect when the original chip failed. The plate-thrus were repaired but took a lot of time to track down the failed traces and replace with small wires to achieve success.

This discussion is closed to new replies.