Discussion Locked

Drive Mappings Being Dropped

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Anyone ever see a situation where 98 drive mappings are dropped during the day? I've seen multiple instances (even on NT4) where I can go to a machine, type in net use at a command prompt, and get "Disconnected" in front of several of the drives. A re-map seems to fix it, however it's kind of an annoyance. Any thoughts on why this happens? Or if anything can be done to fix it? We are not running any login scripts.

Thanks for any info.

Dennis Jones

5 replies

by rabbit_runner

I do not know if this will apply to your situation, but Microsoft has a 'time-out' period for network connections. If a mapped drive is not active, then the connection may be dropped. If that is the case, then you will need to adjust the autodisconect setting on each of the server computers. This is a registry setting but can be adjusted from the command line.

Net Config Server /autodisconnect:-1

by ctmoore1998

Check your adapter propteries in network neighborhood go to advanced and check the media type/speed property, set to either 10 half or 100 half (unless you know your hub supports full duplex on the connected port) if hub is 10/100 set at 100 half first (by default most adapters are either set to hardware default or auto) if problem persists try the 10 half setting.

This discussion is closed to new replies.