Discussion Locked

Dual Booting Win 95 and Win 95

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to find a way to boot both Win95 and 98 on the same hard drive. Really need to have the option to boot with NT, 95 & 98 on the same hard drive.

Thanks

10 replies

by mraug

This appeared to work, but the group I was trying to help decided to go in different direction. Never really tried all three op's at once. Thanks for the link.

by nettek

Like the first answer states, trying to triple-boot those three OS could turn into a nightmare. I'm not sure why you would want to have 95 and 98 on the same PC, because they are essentially the same OS. Maybe it can be done. But if for some reason you need to see official Microsoft documentation that says you can't do it, refer to: http://www.microsoft.com/TechNet/win98/Reskit/Part1/wrkc02.asp

by james_randy

You said you need to boot on the same hard drive, which would be extremely difficult and/or "buggy" at best. Most likely it would be imposible for all 3 operating systems to work properly on one drive. Could you install one or two more hard drives in the computer? That way you could have a drive for each OS in the same box & they could access each other's files. You could boot from whichever drive you'd like by first going into the BIOS and re-defining which drive is the boot drive. I do that very thing with one of my computers. I have a computer with 3 hard drives, c-drive, d-drive & e-drive. They have Win95, Win98 & DOS, respectively. Re-defining the boot drive in the BIOS works great. Good luck.

by james_randy

P.S. to my solution: I had to install each drive & load each OS individually as C-Drive, and then re-jumper the drives & re-install two of them as primary slave and secondary master, D-drive & E-drive respectively.

by mraug

Thanks for the info - after thinking about it the group I was trying to help decided to go in a different direction.

Thanks

by beyond

It would be helpful if you gave us more information about the size and partitioning you have on your hard drive. ... One thing I can tell you about installing NT on the same hard drive with Win9x is that the primary partitition MUST be FAT16. NT will not recognize a FAT32 partition and Win 9x will not recognize an NTFS partition. ALL of these operating systems will recognize, and use, a FAT16 partition. If you have a single partition on a single drive, then it MUST be a FAT16 partition for NT and Win98 or Win95/OSR2.x to coexisit.

This discussion is closed to new replies.