Discussion Locked

Dual-booting Windows 9x on an existing N

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I set up dual booting on an existing NT/2000 machine?

1 reply

by girthbender

This fix is good if you don't want to go through the hassle of setting up a boot loader such as bootmagic, and you don't plan on using win98 too often.

1. disable the second harddrive in your bios
2. turn off the computer and remove the primary harddrive from its cable and replace it with the second, harddrive.
3. make sure the second drive has empty space to create a primary partition or make sure that you create a primary FAT16 partition on it with enough room to install win98.
4. Install win98 as if it was the only operating system.
5. restore the original cable connections to the harddrives and re-enable the second harddrive in the bios.

Whenever you want to use win98, simply enter the bios and disable the first harddrive.Windows will boot right up thinking that it is the only operating system. When you want to go back to NT, reboot and re-enable the first harddrive. Windows NT will be able to access the win98 partition and thereby transfer files in or out.

This discussion is closed to new replies.