21 replies
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by taisn
Hi there
In order to have dual operating systems on the machine, Linux root partition (/) must be present within 8GB space of the hard drive. Therfore, first install Windows with approx. 4GB primary partition, and then install Linux which will be installed where the Windows partition ends i.e. starting from 5GB area. Please, make sure that root partition should not exceed the 8GB limit of hard disk, otherwise, Linux will not boot, however you can create other mount points like home and varetc beyond 8GB area. Interestingly, you can create another Windows partition after Linux installation, if u think there is still free space available on the hard drive.
Regards
Tahir
by unclegarbage
by fenaikh
Hi
Plz read this from MS:
HOW TO: Create a Multiple-Boot System in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us; q306559
Mohamed
**Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********
by unclegarbage
by x-cyber
First: Always try the HOW-TOs. www.linuxdoc.org
You will have several options:
1- Use a Linux boot loader(LILO or GRUB).
2- Make a DOS boot disk, and use loadlin.
3- Make a Linux boot disk.
4- ....other ways.
Links:
1- http://www.tldp.org/HOWTO/mini/Linux+NT-Loader.html
2- http://www.tldp.org/HOWTO/mini/Loadlin+Win95-98-ME.html
3- http://www.tldp.org/HOWTO/Bootdisk-HOWTO/index.html
4- http://www.tldp.org/HOWTO/HOWTO-INDEX/os.html#OSBOOT
Hope you find your answer there.
X-Cyber.
Linux: because restarting is only to install new hardware. AND, A computer is like a house with air conditioning... everything is nice until you open Windows.
by unclegarbage
by elemzy
well, first install win2kpro. then start linux installation, i assume uve done this and gotten to the place it shows u the disks.
just click on add, a small box wpould pop up, the on the first drop down menu within the box, select root(/). then in the next box, type the space u want to use for the root, say 4500.
then select file system as linu native.
click add again, in the first drop down box, select linux swap, then type the space , specifically 127. te installation would then ask u for the the partition to format, select the too u just created. it woyuld then ask u if it should install lilo, deseclt it. the creat a boot disk which would be used to boot linux later. enjoy the rest of the menu driven installation.
get back to me.
by unclegarbage
by unclegarbage
This discussion is closed to new replies.
Trending Linux posts
Sort by Trending