Discussion Locked

Enable AGP and keep 2x speed

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I know we have been down this road before, but now I know more about this whole thing.
I have a Motherboard Chipset: VIA VT82C693A Apollo Pro133.
Memory Slot#1: 128MB (PC133 SDRAM)
AGP Version: 1.00
AGP Status: Disabled
Supported AGP: 1x, 2x
Current AGP speed: 2x
Fast-Write: Not supported
Side Band Addressing Supported, but disabled
Manufacturer: VIA Technologies.
I have tried several 4-in-1 driver downloads, and those that do enable my AGP, drop it from 2x to 1x.
How do I find a driver or drivers which will enable AGP and keep the 2x speed?
Thanks.

4 replies

by thechas

What AGP modes does your video card support?

If the video card BIOS only supports 1X, then the installer for the 4-in-1 driver is correct in setting the AGP mode to 1X.

Otherwise, it is also possible that the AGP port driver installer does nothave a utility to read the signature of the AGP card (and the ever growing look-up table to know the card specifications) and thus sets the Port mode to a 1X default for system stability.

Video drivers seem to be the most problematic of all. Thisis in part because all parties involved are attempting to push the performance envelope all the time.

As long as your video card supports 2X mode, there should be no problem in manually setting the mode back to 2X after a driver update.

If the2X mode setting in BIOS settings does not hold, you may actually have a BIOS problem.
Or, some incompatibility between the motherboard and video card BIOS.

1 way to test if it is the drivers that are re-setting the AGP mode would be to enable the BIOS warring option in BIOS settings.
When enabled, the BIOS will send an alarm message to the display and system speaker whenever any program attempts to write to the BIOS.

Chas

by sbhuck

ATI technologies is suppose to be sending me the information. Going back to a previous problem I had with windows update not recognizing is was using IE5.5SP2, suddenly now I have no problems, it automatically does what it should. This occurred after I had telephine survey done by Microsoft asking what knid of service or problems I was having. They got an ear full, but things are running smoothly all of a sudden.
The last part had nothing to do with the question, but you have seen some ofthe problems I had when I obtained a copy of IE 5.5sp2 from Evolt.org.
Thanks for the advice I am giving you the points because hopefully ATI will eventually get back to me.
Thanks again

by sbhuck

I do not know if this makes a difference, but in BIOS, the VGA BIOS Sequence is: PCI/AGP and not AGP/PCI, like I said I do not know if this has something to do with it or not.
Wilbur Huck

This discussion is closed to new replies.