Discussion Locked

Enable Fax on W2K workstation

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do we enable the local fax modem (MS Fax) to work under the control of a local user in a small business network environment on a Win2000 Professional Workstation?
We recently replaced a Win98 workstation with a Win2000 Professional Workstation Networked to a File & Print Server (NT). We set up the workstation with both an Administrator account and a local user account (Mark). The Fax dial-up modem is A-Open 56-FX. Everything seems networked correctly and all the old network shares & files on the server are available to the user (Mark). But he needs to send faxes on his local machine from Word or Excel. When he prints to FAX the document gets loaded into the Queue and just sits there. The computer refuses to dial out. When thelocal user logs into the computer as a local machine (rather than to the network domain) the fax works properly from Word or Excel. When I log in as Administrator (to the local machine) the fax dials out with no problem. When I log into the networkdomain (from this workstation) as Administrator (using the server password) then all the faxes in the Que from the local user (Mark) are finally sent. (The computer dials out & the earlier faxes are sent). I have tried setting every local user permission that I can find for the Fax Que, Fax Controler, etc. What am I missing? Is there a good step by step manual or fact sheet that explains how to set this up properly?

Your help is much needed!

5 replies

by Ryan Boudreaux140

It does sound like a permissions issue. Try adding the user (Mark) to the Power Users group on the local machine only. If this does not work, try adding him to the administrators group of the local machine. If you do not want to give this user admin rights, then here is a workaround that has worked for us in similar permissions and rights issues with limited access users.
Steps:
1. Logged in as administrator to the local machine uninstall any instance of the modem and/or any software associated with faxing to or from the modem.
2. Temporarily give this user administrative rights on the domain (i.e. add him to the Domain Admins group on the network) and add the user to the administrators group on the local machine. Again, this is temporary.
3. Install all the associated software and hardware for the modem on the local PC while logged in as the user (Mark). Follow the usual procedures for installs.
4. Launch the modem and/or faxing application while logged in as the user (Mark) and test to be sure everything is running fine.
5. Log off as the user (Mark).
6. Log into the local machine as administrator and remove the user (Mark) from administrators group on the local machine. Also remove Domain Admins from the user (Mark) profile on the network domain controller.
7. Log back in as the user (Mark) and test the application without the admin rights.
Usually this process will fix any of the admin permissions that may conflict with certain third-party apps or installs.

Hope this brief overview helps!
ET

by shasca

It sounds like the rights issue is at the domain level. Have you added him to print operators group at the D.C.? If he can fax in every combo except when authenticated then it isn't a local right issue.

This discussion is closed to new replies.