Discussion Locked

Ethernet card could not be initalized

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dual boot with Win2K and Redhat 7.2. When Redhat
installs, can connect via Cable modem to Internet.
When I reboot and start Redhat, can not connect
to Internet. Using 3Com-3c905c card. Irq shows
as 0. Receive message that the ethernet card
can not be initalized. Help, I am new to Linux.

3 replies

by arunsolomon

hi

first of all pls check your network configuration file, check the contents of

/etc/sysconfig/network should display
NETWORKING=yes
FORWARD_IPV4="no"

next cd to /etc/sysconfig/network-scripts

check the contents of file ifcfg-eth0 in this folder, if your cable operator has given a static IP, pls edit the file to reflect

DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=
NETMASK=
NETWORK=
BROADCAST=

Save the file and issue the command

ifup eth0

the IP will be bound to the interface, check if IP has been set with the
ifconfig command

now you can browse the internet

alternatively if you are assigned a IP by a DHCP server then the following statements have to be present in the ifcfg-eth0 file

DEVICE=eth0
ONBOOT=yes
BOOTPROTO=bootp

Save the file and issue the command

ifup eth0

check if IP has been set with the
ifconfig command

Now You should be able to browse the web

hope this procedure helps

Warm Regards

Arun Solomon

This discussion is closed to new replies.