Discussion Locked

External harddrive installation

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a client that is working on several p4/98se systems in his shop and whould like to have a external harddrive setup so he can backup and copy info as required from various sites. He has a usb 2.0(1.1) external box with a seagate 120 mgb harddrive but cannot get any of the systems to recognize it can anyone help?

2 replies

by geb1257

Win 98se may not be able recognize a hard drive that large. In general, computer systems with a BIOS dated 1998 or later can work with drives up to 32 gigabytes (GB) in size. The 32GB barrier is due to the inability of the BIOS to address an LBA that is larger than 66,060,287. Only in the most recent computer systems has the BIOS been upgraded to work with drives larger than 32GB. In addition, in some computers, a 64GB barrier is still to be overcome. So, the primary limit to the size of the hard drive your computer can use is the LBA limit of your system's BIOS. So what this seems to boil down to is that you need to have the most current BIOS in your system and an operating system that supports the large drive you want to install. If your computer has an older BIOS (before 1998) then you need to see if a more current BIOS is available from the computer or motherboard manufacturer. Motherboards built in the past few years generally have a flash BIOS that can be upgraded. If you cannot upgrade the BIOS, then the alternative is a third-party software solution or an IDE controller board. Hope this helps.

by sgt_shultz

try another usb device. if that gives trouble, surf to support.microsoft.com and search for win98se and usb. there are a few fixes that may need to be installed...

This discussion is closed to new replies.