Discussion Locked

Fdisk/ Volume Lable caracter's :(

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to delete a primary dos partition , I can not change the volume label and therefore can not delete or make any change to this partition and I am not able to go Into window's mode to configure . When prompted to enter the volume label I have no Idea how to convert the caracter'son key board. Any idea how to delete this partition thank you :(

17 replies

by beermonster

Hi,
Stop me if I'm wrong, but if you format the partition in dos, don't you get to specify a volume label then?

by mcs-1

If you can get to DOS, simply use the label command: label c:anyname and hit enter. Now your volume label will be anyname which you can get rid of in FDISK.

by blackcurrant

Hi

You do not need to be able to change the label of a volume in order to delete it. If you are unable to delete the Primary DOS partition using Fdisk, then it is likely that you may be trying to use a version of Fdisk which is intended for use with an earlier/later version of Windows. You must use the version that came with your operating system otherwise it may not work.

If you cannot get a copy of Fdisk to work with your machine you may be able to download a copy of Partition Magic. This program is cheap and powerful, and should be able to delete/resize any partion on your drive.

Good luck

by cglrcng9

Use the option #4 or #5 in FDISK to look @ the current Volume labels and use that label to delete the partition. Or use a proper matching bootdisk to boot from A:\, and @ a DOS prompt, type C: and hit enter, then type FDISK /STATUS hit enter, and look for the current volume label, write it down and use it to delete the partition in FDISK. Then create a new partition, label it anything you want (normal label I use is Drive_c:) and FORMAT the drive.

But do use the appropriate boot disk for thejob. IE; Win98 on Win98, Win98SE on Win98SE, etc...

Good Luck.

by hereinoz

I am dragging this from memory a long time ago, but I remember a problem FDisking a drive where soemone had put in some invalid characters (I seem to remember they had used CTRL or ALT keys)and FDisk wouldn't recognise it, and it was no longer a valid formattable partition. It sounds like that is the problem you have.

The only solution we came up with was the almighty Partition Magic, running from floppy. There was no other way around it.

Sorry I can't be more helpful.

Alan

by saihib

Sometimes, as mentioned above, Fdisk just can't get the job done. Do a search on google for: delpart.exe download This free utility is avaible from many sites. Use it to delete your partitions then use Fdisk to create new partition/s and format.

by dmessner

Boot to DOS using a win98 boot disk.

use format command a such:
format /q
the format should take a 10 to 20 seconds(/q = quick) and you can then specify the label of the drive, just hit enter to leave it blank.

You can no perform FDISK as you wish.

This is a common problem with corrupted drives, usually getting a lower case letter in the drive label.

Good Luck,

David

by bjwnorris

In order to delete a volume label that has a different Cap, you must have the vesion of fdisk that created it
Brandy

Good Luck

This discussion is closed to new replies.