Question Locked

Fn F8 Not showing on notebook and Projector

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Dell Latitude D505 and the toggle to LCD and Projector, both displays, is not functioning. Any Ideas? I found a little information regarding the standby switch possibly going bad???

4 replies

by tintoman

I beleive I am right in saying that you need to go to desktop properties and extend your desktop onto a second monitor to make this work as you would if you attached a second monitor to the machine
Also I am assuming you know that you need to press the function key and the toggle button together

by bhawes

The Desktop is extended to a second monitor. But as long as I have the projector cable connected it will only show on the projector, even after trying the toggle options. Once the cable is disconnected it will come back to the Notebook LCD.

by thumbsup2

do NOT press the function F8. That is a toggle for either/or. And do not extend the desktop. Just make the laptop primary display and leave the 2nd monitor alone.

Turn on the computer first, then turn on the projector. If it does not automatically pick up the signal from the laptop, press the setup button on the projector and make sure the input is coming from the computer, or set to auto.

This discussion is closed to new replies.