IT Employment
Wha does the following error mean:
error sensing hard disk 2.
that happens on boot .tried 2 different hard drives: no fixed disks
by liame
The bios cannot correctly determine the configuration of your disk drive. This happens when.... its not there, its broken, bios setting for it are wrong - try the auto setting, cables are wrong or faulty or jumper setting are wrong.
Try the disk in a different PC to checks its okay.
Check, double check and triple check ALL jumper setting - both on that drive and anything on the same cable. One should be set to master (or master/slave present) the other to slave if there are 2 drives on the cable.
Put bios detection settings to auto.
Try different cables. Make sure the cables are correct for the drive(s).
This discussion is closed to new replies.
Sort by Trending