2 replies
by loki777
by rcom
It would help to know more info. What error message is displayed when you attempt to go online.
What are your connection settings, DHCP or static IP, DNS, Gateway etc.?
You said that you have 2 IPs released to your account. Are you talking about actual static IP addresses or 2 user accounts? If you use static IP addresses you'll need strong security because your PCs will be directly open to outside connection. The IP addresses that are used for local are usually in the 10.x.x.x or 192.x.x.x ranges these would not be pingable outside of the LAN.
Try pinging local 127.0.0.1 then the other PC or the cable modem? To use ping just open a command prompt, type in ping follwed by the IP address then hit enter. If you can't ping local then you know you're not connected or there's an issue with the adapter or possibly the RJ45 cable.
I'd try connecting the cable modem directly to the WinME PC and see if it connects like that. If so at least you know the connection could work. Most people use a router with cable modems. The router has the connection setup in it and the computers use it as the gateway. Most routers will come with enough RJ45 connections to handle your setup so you won't need the hub. This is much more secure since the PCs are not visible behind the router which has a built in firewall.
What port is the cable modem connected to in the hub. See if it needs to be in the uplink port and/or that the port is switched as needed.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending