Discussion Locked

hit by W32/Opaserv.worm.m HDD NOT usable

0 helpful
23 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

One of my client machines got hit with W32/Opaserv.worm.m, whenever the machine boots up I get the
NOTICE:
Illegal Microsoft Windows license detected!
You are in violation of the Digital Millennium Copyright Act!
Screen.
This machine has critical data that I must recuperate, unfortunately the disk is inaccessible, and I tried to copy the data with Norton ghost to try and get creative with different DOS commands, but ghost in unable to read the information. I installed winxp in the machine on a different drive and set the affected drive as slave, xp reported the drive as not being formatted and asked if I wanted to format, so coping the information that way is not an option. Is there a way to make the hard drive accessible again? Any help will be greatly appreciated.

23 replies

by mario agosto

fdisk is able to read the partition information for the drive, but whenever I boot with a win98 installation cd, the c:\ is not visible, if i try to acces c: it says invalid drive specification. Before I can attempt to remove the virus I must be able to acces the partition.

by joseph moore

Ok, so this machine was hit with the K variant of Opaserv (this variant is only a few days old). There are manual removal steps on Symantec's web site for removing this.

First, read this:
http://www.sarc.com/avcenter/venc/data/w32.opaserv.k.worm.html
(please remove any spaces)

That is the Symantec write-up of this version. It states how to manually clean up the drive. Just follow those steps.

There is one thing in the steps that I am not certain of, though. This virus puts an entry in the RUN section of the Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run) so that when Windows is started, the virus is started automatically. Now, I don't know if this will be envoked when you boot into Safe Mode. I can't remember right now. So, just to be safe, I would boot to a DOS boot floppy, then go to the drive in DOS and manually delete the file C:\WINDOWS\mqbkup.exe
That file is the virus that is run on startup.

So, after that, boot into Safe Mode and follow the removal instructions as per the Symantec write up.

hope this helps

by mario agosto

I read the instructions on Symantec's and McAfee's web sites, but I am unable to do anything, I can't read any files if that was a posibility I would follow instructions on how to remove the virus. Before I can attempt to remove the virus I must be able to read the drive. My question is --HOW DO I, MAKE MY HARD DRIVE USABLE?-- Is there any DOS commands to try to bring it back to life? please note that the drive is physically fine, but the data is not accecible.

by 7nt

Your master boot record may be damaged from the virus, which may be why the c:\ drive is not recognised. Boot up from the W98 floppy to the prompt and type "fdisk /mbr" without the quotes to reset it, then follow the removal instructions on the Symantec site once your c:\ drive is accessible again.

by bobho

I would start by trying to repair the mbr as stated above. If that does not work then you will need to use one of the various disk recovery tools available. I prefer OnTrack's easy Recovery Pro but there are some usable free tools available also. Here is a link to some of WebAttack's free tools:

http://snurl.com/ida

Good luck.

DrBob:>)

by mario agosto

It looks like the virus modified my partion information. I tried to restore the master boot record, but that did not help. I had one partition orginally, fdisk reported 3 diferent partions including one that was reported as a novel partition. I removed the partion and reinstalled win98 in hopes to be able to read the information of the other partions. I belive since I deleted one of the partions my information is now lost, is this the case? or can I still some how get it back?

by zlitocook

Have you tried the ntfs reader? It is a free utility on the web, it will alow you to read and copy/move files from one hard drive to another. Was the infected drive ntfs? Try the simple things first, install NT or Win2k on a hard drive install a virus protecton program on it, then set the infected hard drive as slave and copy info to the master drive. Let me know if that dont work, I have other ideas.

by rcom

Yikes! Since you've had the fake "Illegal license detected" message you'll need recovery software. Previous to showing this message files are deleted from the drive. Another concern is any other systems attached on the same network.

I recently had to recover my personal drive. The FAT table was corrupt and after running fdisk mbr and other utils I ended up with a drive that showed no partitions at all. I downloaded and tried a few demo versions of recovery software but the one I chose was R-Studio $79.00 US. It showed everything on the drive and was easy to use.

www.r-tt.com

I decided to start fresh and used the software to create an image of the drive. I can explore the image and restore files as needed. I've had FAT16,32 and NTFS partitions on the drive and all show up and can be read. There's some older files that aren't associated to anything but they're still available to be restored.

You can download the free demo to see if the files are there first.
Windows Explorer interface.
OS'-Win9x,ME,NT,2K,XP.
FAT12,16,32,NTFS,NTFS5,Ext2FS(Linux)
RAID reconstruction.
Create complete disk IMAGE FILES.
Recover files from deleted partitions,
Recover data after: FDISK or other disk utils VIRUSES, damaged/destroyed FAT,MBR
Content can be edited in the hexadecimal editor

www.r-tt.com

by cglrcng9

Straight from the Symantec site according to the "REMOVAL INSTRUCTIONS";

"NOTE: These removal instructions will be useful only if the payload has not run. If the payload has run and you saw the "Illegal Microsoft Windows license detected" messageas described in the previous section, it is very likely that you computer is no longer functional. In this situation. we suggest that you contact the computer's manufacturer for assistance in restoring CMOS settings and the operating system. You will also have to restore data from a clean backup."

Doesn't sound too good. Tell us your backup practices were good?

Good luck.

by cglrcng9

Just a note, according to the site, when the payload runs, the BIOS is wiped clean, IE; no more CMOS settings. Have you tried to flash the BIOS?

by mario agosto

Thanks every one for your help, I was unable to recover my files, I reinstalled my os after deleting a novel partition on my hard drive, I deleted it since I never installed novel on my system. It looks like I erased the files togheter with the novel partion :(.

This discussion is closed to new replies.