home biz. firewall
I am starting a home based biz and need
some info on access lists...
What is the best way to firewall a site
that needs to be up 24/7?
what are some good ways to remotely admin
this firewall?
Windows Forum
I am starting a home based biz and need
some info on access lists...
What is the best way to firewall a site
that needs to be up 24/7?
what are some good ways to remotely admin
this firewall?
by syscokid
For a complete discussion of privacy on the net, goto Gibson Research:
https://grc.com/x/ne.dll?bh0bkyd2
It's ALL good stuff, but bullet 7 particularly discusses personal firewalls in detail.
by mikecaskey
by syscokid
by mikecaskey
I think there are a few "free" firewalls out there designed for Windows environment. However, if you have an old 486, install Linux and us it's firewall capabilities. No need to buy a product. There are also some WEB based administration tools for the linux firewall (Look for FCT).
Regards, Thomas
by mikecaskey
by aaron v
by mikecaskey
by mckaytech
I have had very good experiences with both Linux-based router/firewalls (LRP) and the new Linksys device.
My LRP is administered via secure shell and the Linksys has a Web interface but once it is set up, administration is mostly just reviewing the firewall logs. An LRP box can be set up to send the logs to another machine for storage and review.
If you don't mind some initial tinkering, the LRP solution is more versatile. If you need more of a plug-n-play device, the Linksys is both effective and low-cost.
paul
by mikecaskey
by clpadmin
If I understand your question correctly, you have already set in place a firewall, but want to know how to set up the access lists correctly. There should be some default entries:
1) Deny all on the external interface for all protocols.
2) Reject any packets coming from any source to the firewall and reject any packets going out from fireway to any destination (this makes the firewall transparent, i.e. protects the firewall from getting hacked).
3) Reject any packets inbound from the external interface with a source address that belongs to your network (prevents spoofing).
Then, set rules that would allow certain packets and ports through as you deem necessary. Make sure you know how your firewall works. Certain firewalls, such as Checkpoint Firewall-1, reads the access lists sequentially, so the order you specify them is important (add rule 1 above last).
To answer your question about a good way to remotely admin the firewall, I wouldn't risk it. But if you really have to, then I would
by mikecaskey
by mikecaskey
This discussion is closed to new replies.
Sort by Trending