Question Locked

how can I remove label stuck inside Officejet 7210 ?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an HP Officejet 7210 that has been incapacitated by a label being stuck on the roller that grab and feeds the sheet of labels through. It is not easily accessible through the back or front. Has anyone any idea how to get the label off the roller without spending more on the repair than what the printer costs?
Thank you very much.

5 replies

by cmiller5400

Other thank taking the printer apart, it would not be easy. Try soaking a long swab/qtip with some sort of goo be gone stuff and swabbing it on the label, then using a pair of tweezers/long needle nose pliers to see if you can peel it off. Just be patient with it.

Disclaimer: Just be warned that you may destroy the printer in the process.

by jdclyde

The thing doesn't work now, so it isn't like you can break something MORE than "not working", so give it a shot.

The "goo be gone" is good stuff.

by older mycroft

That labels on sheets are only supposed to come off AFTER they are printed, as opposed to WHILE. :D

by mjd420nova

One of the tricks I've used is to get a pair of long forceps or hemostats, like at least 10 inches and some of the long wooden stick cotton swabs(Q-tips). Use oily finger nail polish remover or acetone and soak the q-tip in it, then working with the forceps and q-tip, moisten the label and peel it off the roller. Slowly and with care the label can be removed and be sure you get all the sticky stuff off the roller(s). A prevention method is to use the straight thru method of paper feed and use only fresh label stock to prevent future events.

This discussion is closed to new replies.