Discussion Locked

How do I eliminate a virus that isn't?

0 helpful
85 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I had a W98 2E pc lock-up during a Norton virus scan on a file named C:\PROSCRN. I cancelled the scan, and opened Windows Explorer. When I looked at this folder, it contained 11,987 files, all with a size of 0 bytes. I clicked on the folder, I sawthat all the files had the same name: _ _ (underscore, space, underscore). I moved the folder to the recycle bin & selected empty. I got an error message stating "Cannot delete _ _ . Type in the correct file path." PROSCRN is now gone from the pc(I think), but the files are still there. While showing empty, with the show all files box checked, the recycle bin reports that it contains 11987 files, and 2 folders. I tried to run the virus scan again, now it locked up on C:\RECYCLED\Dc1\_ _. I cancelled the scan, and went to Norton's wipe data utility. The program went thru the motions of deleting the Dc1 (which does show up in explorer, in the recycle bin, but if you open the recycle bin directly, you can't see it)After the program ran,it told me it failed to delete the selected files because they are write-protected. I rebooted the pc and went to the DOS prompt. I tried doing:C:\del recycled . Thinking that I would delete the recycle bin, then reload it. DOS told me that the filewas not found. I exited and completed boot-up. I checked the DOS name for the recycle bin and it is recycled. I went back to the DOS prompt and tried again. Same response-file not found. I have tried contacting both Norton and McAfee regarding this, and neither will assist me... they both say it is not a virus, and they will not help. The tech from McAfee did suggest to try del recycled in DOS, but I had already tried that. I have already been given the advise of "it's not hurting anything,leave it alone", but it is hurting something-the virus scan will not complete. I am at my wits end. Any help anyone can give me to get rid of this would be greatly appreciated!

85 replies

by bwheel

You might want to just run a scandisk. That is a large number of files that don't seem to exist. The other thing that I would try, would be to set the recyclying bin size to zero, and set the recycling bin to delete files when put there. (just temporarily) You can do this by right clicking on the recycling bin and choosing properties. My next solution if that does not work is, if you have norton installed, try uninstalling that, and then emptying the recycling bin. Let me know if that works. It is an interesting problem. I almost wonder if 98, does not understand __'s in the recycling bin as the files first letters.

by Member 25073181

Ok, interesting one you have here
I think we can rule out virus for starters. From your description I understand that you have managed to delete the files and they are now residing in your recycle bin? From this point there are a few things you could try:
1. I imagine you have tried this (but I will mention it just in case), try emptying the recycle bin

2. If you recycle bin won't empty, try to restore them to the original folder. Once they are back in your file system, delete them again but hold down the shift key as you do it, this will result in them bypassing the recycle bin and being deleted directly

3. If they refuse to be deleted because of "file in use" etc messages, try shutting down all running applications including TSR etc. Press CTRL ALT DEL and bring up the close program window, shut down every program running in that window that you can, then try to delete the files again

4. Start your PC up in safe mode and try delete the files while in that mode

5. Try repairing your installation of WIN98 by running the setup program again

6. I imagine you have also tried this (but I will mention it just in case), try running any Norton check disk type utilities

7. Try deleting only some of the file at a time
From what you have mentioned, the above 6 options (or a combination of the above) hopefully will give you some direction to go in.

Best of luck

Daryl Sheppard
daryl_s@iprimus.com.au

by george_koitchev

The "_ _" files maybe content illegal characters in their names. I have the same problem when I try saving some file to a Cyrillic filename. The Cyrillic letters convert to "_"'s by themselves.
I think that is the reason for the NAV lockup. Norton programs cannot deal with such filenames.
I suggest that you run Norton Disk Editor (or other tool for direct disk editing) and manually replace the wrong symbols to correct, or, place the the symbol 20h at the first palce by which the file will be assumed deleted.
All this operation must be done when the PC is restarted in DOS mode.

Good luck

by albert franco ii

Try to put the hard drive in another computer as a slave drive. Make sure that you are not starting the OS from the bad drive. By not using the OS from the hard drive you can do some things that are otherwise impossible. DO NOT EXECUTE ANY FILES FROM THE DRIVE. (To avoid infecting the new drive.)

Do a complete disk scan of the bad drive.

Try to delete the files. If this does not work then you'll have to either go the disk editor route or copy your documents and files and then reformat.
There was a virus a couple of years ago that quietly encrypted parts of the hard drive in the background. The encrypted segments were next to impossible to delete. Reformatting was usually the only recovery strategy that worked. Another benefit of reformatting is that you can be more confident that the virus has in fact been erradicated.

by susan tech

I did a Google search and came up with this

http://www.textfiles.com/apple/DOCUMENTATION/protalk

... users add questions or A)dding a few questions yourself. There is a file called
PROSCRN included with ProTALK. I did =NOT= write it, so don't give me undue ...
28k - Cached - Similar pages

Protalk is a programme that was designed for Apple and I cannot assume anything but maybe the document on the link will give you some ideas. Maybe the author of the programme may help you in some way. The document is an extremely long so I didn't read it.

The other option would be to find a DOS antivirus programme (F-Prot, etc) and do a scan at DOS bootup. All else fails, format after backup.
P.s for virus info I go to Microtrend for RESULTS (Nortons not so good).

by jonmc

Have you tried renaming one of the files before deleting?
When in DOS, does the DIR command show you the RECYCLED directory on the C:\ drive?
Can you right-click on one of the files (after restoring from the recycle bin) and view Properties? If so, can you uncheck the Read Only box?

by jereg

I read the answers and they all have valid points. But I learned the hard way a number of years ago, if I have to spend more than three or four hours working on a PC problem, especialy if it has to do with corrupted files, it's better to stop what I'm doing and just reformat the drive. It seems that your PC will run, so I would boot from a floppy, copy your data file to another floppy, tape, cd, network, whatever, and reformat. It would be great to find the answers to all these problems, but I don't have the time anymore. You probably have a number of hours on this already, but it's just a PC, there's more to life than wasting time on file problems. Reformat the drive and mve on the something better.

by mike (from canada)

search for attrib.exe and then type the following in dos:
attrib -r -h -s -a c:\recycled\*.*
del c:\recycled\*.* and press y to the question that follows.
rd c:\recycled
Now restart your computer. Those files should be deleted. and how is it possible that 2 or more files have the exact same name? and then try updating Norton Antivirus, or better yet, use the MS-DOS version.

by mattl

At one point running the Norton AV update program resulted in exactly what you are experiencing. They have a downloadable utility to rid the drive of the problem folder.

by philthegreat

I think it is a system problem.

1) Do you know what is PROSCRN in your computer? Do it means "Product Screens" or related to Apple's product? The name of the directory implies some kinds of old programs.

2) If it is old programs, then it may be the programs identification problems. Or it may be due to the fonts unrecognized by your computer.

3) If the problem is found just after a crash of computer, it may be a corrupt of the FAT or hard disk failure causes it.

Suggestions:
1) Do ascandisk. It may fix the problem.
2) If it does not, run "sfc"; don't correct the problem files the first time. Write down all the files listed by the computer to see if it is the system crash has caused the problem.
3) If you are sure now, then replace and updated the files suggested by "sfc" now.
4) Rename the __ by other recognized name.
5) The problem does not lie in the recycled bin, it is the software. The system cannot recognize the name of the file system.

After all that, please try to use this freeware to kill all the wrong registry.
"Regcleaner" in www.jv16.org
It is very powerful and it will help you to eliminate the wrong registry.
Tools-->Registry Cleanup--> Do them All

by @lberto

If I were you,

Press F8 when it is booting up
select Safe mode Command Prompt Only
then:
cd \recycle
attrib -h -r -s *.*
del . (then press Y)
cd \

then start it up the normal way. When windows is up and running again you should make sureyou have your latest virus denifition file updated, run scandisk and scan the whole hard disk, all files

It should make it,

Good luck.

@lberto

by cdeclercq

Boot into dos, the recycle bin is hidden. DO NOT DELETE IT by execute this command.

del C:\recycled\*.*
if that does not work, use the dir /ah to show hidden files. THe recycled should show. Then attrib -h C:\recycled to unhide it. then you should be able to delete the files. you may have to write a script that renames them for using the for loop command.
try ren *.* delme.1 or something.

by paul d. masley

I ran across this problem and you will not believe it but Norton caused it.

The easiest way to remove files that are stubborn, including hidden files is to use the deltree command as follows:

deltree /y c:\recycled\*.*

Make sure that the deltree command is in your c:\windows\command directory. It will take a few minutes to remove 11,000 files but it is foolproof.

Good luck.

Paul.

by Member 32742599

Files that are not seen in DOS need a change in "attribute". Find the files in Windows and changs their attibutes to Archive only.

by penguinsrule

Everybody's already covered all my suggestions

run scan disk
Check the file attributes in Dos
use deltree to delete the tree

by curacao_dejavu

this is probably not a virus, a program (maybe nav itself) corrupted the file.
this can not be solved in windows since windows doesn't recognoze those weird characters and doesn't know how to handle them.
boot into dos mode and go to the recycled folder. (name could be recycler, or recycled, don't remember exactly how dos will name the folder)
then use the attrib command (attrib *.* -h -s -r)
and the use deltree (deltree *.*) to delete the contents of that folder.

and then boot then to windows and you are done.

regards,

Leopold

by paul larsien

I had this same thing happen on several W98 machines I was running, before installing SP2. The problem was a bug that allowed the removal of a program, but replaced the files with placeholders for verification. The bug caused the verification to stop prematurely and thus engraving the data into the drive. I ran SP 2 after this, and it helped for a while, but I still occasionally found placeholders, and yes they would hold up both virus scanning and scandisk. I ended up re-imaging all the boxes and installing the appropriate patches right away.

Good luck. I suggest you reimage. PDL

by rocketservers

Here is a suggestion for you. The space you are seeing is not a "space" (ascii-32) it is a blank character (ascii-255) which Windows seems to choke on everytime. Here is one way to try and fix it. Boot into MSDOS mode then type "deltree c:\recycled"without the quotes. If this doesn't work then email me and I will give you a few others. I doubt any windows based solution will fix this.

by chessmaster315

I did not see in any of the answers the obvious answer. Get on the internet and
Download from MacAffe and/or Norton the most recent version of their antivirus software. If this is a new virus and your software has not been updated, your old virus software will not protect you from new viruses. No offense against MacAfee/Norton, but those people who answer the phones dont always give you the best information. Usually they are not MCSE's. You should also do the same thing and update your Win98 to SP2. You can download the updates to Windows 98 free at www.microsoft.com If both of those fixes dont work, then I would suggest backing up important files, reformatting, and then reload your operating system. My instructor for MCSE classes recommends reloading your operating system on your computer every 6 months or so. Whenever I reload my operating system, my computer runs faster and like new again. It is very easy to accumulate junk files that are hard to delete. Reformatting gets rid of all the junk files and you start fresh. LB, MCP

by istal

Just try this URL (it's not just like that) :
housecall.antivirus.com

All best.

by otura

If your logical disk is formatted in FAT16 try to start up your system with MS-DOS 6.x or lesser. Then try to delete & rd or deltree.

by jphamel

Your were not far with the answer for McAfee,
You have to boot in dos mode.
Reboot in dos mode.

form c:\
type cd recycled
when you are there
the prompt says c:\recycled>
delete the content of recycled.
It worked for me. It should work for you.
It's the only way I've been able to flush peristent content from recycle bin, Try it out.

by seagull data services

You need to re-boot in DOS mode before you can mess about with system folders, otherwise windows may not allow you to delete/alter them.
Once you're there the following should do the trick

'make sure you're on drive c
c:

'change to the root dir
cd \

'clear the h(idden) and s(ystem) attributes of the recycled folder
c:\windows\command\attrib -r -h -s recycled

'delete the entire directory (/y avoids prompts)
deltree /y recycled

're-create the directory
md recycled

'reset the attributes
attrib +h +s recycled

Hopefully this will help

by cyberace

hi

..looks like all the possible answers have been give..anyway here is one more

in windows restore the deleted files from recycle bin
reboot ur system in safe mode command prompt only
cd PROSCRN
dir (to check if u can see all the files)if u can see all the files..
del *.*
cd ..
rd PROSCRN

if u can't see the files ..
attrib
attrib -h -s -r *.*
del *.*
cd..
rd PROSCRN

hope this help

Good Luck

by denodave

After reading many answers here, and being a frequent flyer on the Norton Red-eye I think it's a Norton glitch...either they're placeholders or unrecognizable characters. My suggestion also is to use dos' deltree command...BUT IF you want to try it, I have used some utilities that can specifically be directed to find and remove zero-length files. They will also tell you file attributes that you will have to change. Fix-It by Ontrack is thorough (and dangerous), the other is System Mechanic byIolo which you can download for trial. I can't say they'll work because I can't duplicate your problem. ANOTHER OPTION is a really mean wiper program I have called Blowfish...it doesn't care a whit whether the files are protected or not (that's the problem with Norton, it short-circuits itself). Good Luck!

by robert_a_mocarski

I can't add any additional suggestions. If the suggestions posted here already do not correct the problem, I think you'll either have to live with it or rebuild the PC.

I did want to caution you about deleting everything in the recycle bin, however. Windows stores a hidden file called desktop.ini in the recycle bin. You will need this file for the recycle bin to function correctly. I suggest you save a copy of this file prior to deleting all of the other files.

Good luck

by akstephr

Yes - the problem is fixed. I was busy & didn't have time to get back to my question to close it. DOS was the way to go.

by brent t

Hey,

Tons of great answers, however it sounds like the FAT is messed up. Perhaps not totally but I would look at running a third party disk utility like Norton to try and clean it up. Other than that I would try and rename it to a valid file name and try and delete it again.

by brent t

Hey,

Tons of great answers, however it sounds like the FAT is messed up. Perhaps not totally but I would look at running a third party disk utility like Norton to try and clean it up. Other than that I would try and rename it to a valid file name and try and delete it again.

by saniblue2002

Check out this article
" Cannot Delete Files or Folders with Extended Characters [Q131702] ". You can find it in TechNet.

I think this is the answer.

by saniblue2002

Check out this article
" Cannot Delete Files or Folders with Extended Characters [Q131702] ". You can find it in TechNet.

I think this is the answer.

by sperez

Click on Start, Run, then type in "command" and press enter. Type "cd\" then press enter. Type "cd recycled" then press enter. Type "attrib *.* -r -a -s -h" and press enter. Type "dir" and press enter. If there are any files in the recycled folder, they will be listed now. Type "del *.*" It will ask you if you are sure you want to delete all the files. Type in "y" and press enter. Type "dir" again to make sure all files have been deleted. Now to get rid of the folder dc1 in the recycled folder you must type "deltree c:\recycled\dc1" Press enter. It will ask you if you are sure. Type "y" and press enter. Repeat the deltree step for any other folders in the recycled folder.

by mm212

Boot into DOS mode and type "deltree recycled" and answer "Yes". Reboot. Windows will automatically recreate the Recycle Bin for you.

If you have more of these files elsewhere on your hard drive, connect this drive as a slave on a Windows 95 computer. I've run into invalid characters on downloaded files and the only way to delete them was to connect over the network from a Windows 95 system and delete them that way. Strange, but it worked.

by tjc

I would recommend trying scandisk or norton disk doctor since it really sounds like the fat is messed up. If all else fails copy all your data off and fdisk the drive, reformat and re-isntall everything.

by ricky

You'll have to do it from the DOS Command prompt... Win 9x cannot handle such file/folder names.

Try using the DOS "CD" command to get into the Recycled folder. If that doesn't work --you may need to first use Win Explorer (in GUI mode) to open the recycled folder, and then with it open use the Start->Run->Command (from the start menu) to open a MS DOS Window.

Recycled should be your default folder.

Then (in the S|MS DOS Window) use the DOS DelTree command to get rid of all unwanted folders and files.

Should solve your problem... ;-)

by acs

I have encounter very similar undeleteable files in Win 95 and 98 . I used an old sharware file management tool called Elf Tree. It boots from DOS and allows access locked and unchangeable attributed files as well file content editing. I have beensoftware tech for 12 years and never leave home without my little Elf Tree. Good luck

by fyrman24

answer 9 is correct, the norton antivirus autoupdate( liveupdate ) is the culprit and they have it in their knowledge base...you also could go into norton configuration advanced tab and tell it not to scan the recycle bin, but that could allow a viral backdoor that i am not aware of anyone using yet...but who knows.

by bhrdwh

1. Run scandisk on your C: drive, let scandisk fix all problems / changes
2. Search & Delete all .CHK files fro C: Drive.
3. Empty Recycle Bin.
4. Also try Deltree C:\ProScrn folder.
5. Just to be sure, did you ever get any msg at boot "DIS IS ONE HALF !!" ... msg for one half virus that makes these _ fodlers, which you cant remove. Then you need to boot froma clean disk & remove it.
6. Just to confirm, Go to C:\> mem /c/p
7. Check "COnventional" Memory Summary - The size must always be 655360.

If more or less, there is a memory virus in your system, probably residing in boot sector.

If this is the case, I suggest you backup your docs / data & remove all partitions, make it again & format the entire C: Drive, load the OS again.
All the best,
Akash
Akashdeep_B@yahoo.com

by white wolf

I assume you ran Norton Disk Doctor, Scan disk, and the like on the system hoping it was merely a disk error, but find to your disgust that these files aren't a disk error. I ran into the same situation as you, where using all the common methods didn't seem to nix the files.
I suspect you'll have to do here the same thing I did, which is turn to one of the 'industrial strentgh' File manager utilities. Specifically,
what you need here is a utility that will let you see and handle file (and in this case, delete them) regardless of thier attributes.

So, for handling this problem on a dos machine, I'd normally turn to using the old venerable Norton commander, unfortunately, since that's problably not available anymore I'd suggest you try one of the very close clones of them at (http://hjem.get2net.dk/fec/volkov/volkov.html, just scroll down the page and use the download link to get it.) I used norton commander to solve this problem by just rebooting to dos, bringing up the utility,navigated to the dir, selected the files in question, and deleted them. The whole process was done in under five minutes.

Plus, you can also get very good windows versions of these norton commander clones, the one I recommend is the Servant Salamander available at (http://www.altap.cz/salam_en/index.html).

Just make sure your set the option to not use the recycle bin when deleting files for this particular problem.

Now I realise, there's a little learning curve with theses utilities,but once you master these babies, "you won't want to leave home without them" - thier real handy for doing system administration and technical work on multiple systems!!!

Good Luck!

by mrsnib

You had the right idea with using DOS.

Using it the following way it will work

From Windows Start menu choose Run
type dosprmpt and press Enter
a DOS window will open
type CD \RECYCLED and press Enter
type DEL . press Enter
a prompt will ask to confirm deleteing all files in directory answer with a Y
Close the window

I had to throw something in the recycle bin and empty it to refresh the icon.

that's all
mrsnib@nac.net

by michaeltubs

Set the recycle bin size to zero. These are corrupted header file names. Else restoe files, select all these files in Explorer right click properties and take off all attributes. A defrag will see these files and delete them as well.

by nyghtfall

also, do you have access to the files, and as tedious as this might become, have you tried renaming a file, then deleting it, for ctrl-deleting to skip the recycle bin?

This discussion is closed to new replies.