Discussion Locked

How do I Login to a Windows NT Domain

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been using Windows 95 and have both a Novell Netware Client and a Client for Microsoft Networks in my network settings. The network properties for the Microsoft Client allow me to Logon to a Windows NT Domain, to define the Domain Name, and to Logon and restore network connections.
I am setting up a Windows XP and want to have the same Network Functionality. I can point it to the correct Novell Server but cannot find XP's version of the Properties for the Microsoft Client that allows me do define like 95 does.

Any suggestions would be greatly appreciated.

Thank you,

Dean

7 replies

by mrjay67

right click my computer. Go to properties, there should be a Network Identification tab. From there, you should see 2 buttons. One is for setting up the network through a wizard(if I rem. right) the other is where you can change the name of PC and add domain to log into. Will look a bit different than Win95 but close enough to figure out once you get there.

To get to network properties right click on My network Places(or if you open My computer what ever the network option is to the left) and choose properties. This should bring up a screen with the network adapter(s). Right click on the adapter and choose properties again to see the network properties(client, protocols, etc).

A NOTE: Only Win XP PRO can log into a domain. XP Home does not have this option.

Hope this is what you were looking for.

Jason

by dgrow

I had done all the things Jason has suggested. The Domain even added xxxxx.com to the end of it so I know the PC is seeing the 2000 server but it is not signing me in and mapping the drives like it did on 95. I do have XP Pro.
Thanks for the info Jason
Dean

by lgallagher

the first thing you need to do is make sure your user name and password are the same on your client and your server if that is correct go to control panel and than to systems, when in systems click the computer name tab and change your computer nameto match your user name also click the join domain button and fill in you domain name. you will need an administrator password. you mentioned that your drives did not apear you will need to manually map your drives unless you have a logon script added to the server hope this helps

by dustyd

If I am reading you correctly, you need to install the Client Service for Netware on your XP machine.
Navigate to your network connection properties, click 'Install', select 'Client', select 'Client Service for Netware'.
Configure your settings as you did in Win95.

This discussion is closed to new replies.