Discussion Locked

How do you Use Netmeeting with Dual NICs

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am attempting to do netmeeting securely with an outside party. I will not be using an ILS, just direct address connections for some private business-to-business applications. My netmeeting host computer "Host" has dual NICs - one on our inside house LAN, and one on a DMZ segment. When the machine was initially configured with dual NICs, both NICs were interpreted as gateways causing delayed response time for basic logins and the like (the DMZ route was actually shorter than the regular route). I modified routes in the following ways:
route DELETE 0.0.0.0 MASK 0.0.0.0 {DMZ interface}
route -p ADD {DMZ network} MASK {DMZ mask} {DMZ gateway address}
The routes seemed to be right.

Then, I started up NetMeeting in "Host a meeting" mode. A client NetMeeting from the inside house LAN was successful in calling the netmeeting using direct TCP/IP address of "Host" on the
inside house LAN. However, a client NetMeeting from the DMZ was unsuccessful in calling the netmeeting using the direct TCP/IP address of "Host" on the DMZ.

As a test, I removed the inside house LAN connection, and rebooted "Host". With only one NIC active, the client NetMeeting from the DMZ
was successful, proving that there was no firewall issue of any kind.

I concluded that in my dual NIC configuration, NetMeeting was listening only on the NIC associated with the inside house LAN.

Does anyone know how to make it listen on both NICs in this situation?

1 reply

by saihib

In Netmeeting, when you go to Help/About Windows Netmeeting, in the lower left side of the screen it says IP Addresses. Do both IP addresses show up? My bet is they don't. This may be a semi-workaround:

On the Tools menu, click Options.
On the General tab, click Advanced Calling.
In the Advanced Calling Options dialog box, click Use a gatekeeper to place calls.
In Gatekeeper, type the computer name or IP address of the gatekeeper computer.(In this case the IP address of your second nic) If you are calling a conferencing server, type the name of the MCU instead. I'm not sure this will work because I don't have a dual nic machine to test it. But if it does allow you to call out that would be cool. I'm not sure about that configuration allowing you to accept calls, however.

This discussion is closed to new replies.