Discussion Locked

How to Bloack USB port on a PC?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I am at a Power Plant as Sr. IT Engineer. My concern is to black the USB port so that none of the user can copy data to/from the computer. There are a many devices for storage which is a hazard to any organization's secret data/information.

Looking for replies (If possible copy at rizwan.haq@kapco.com.pk).

Rizwan Ul Haq
Kot Addu Power Company
Pakistan.

7 replies

by thechas

If you want to fully disable the USB ports, turn them off in BIOS settings.

To secure the change, set a BIOS password and install case locks so that users cannot reset the BIOS to enable the USB ports.

Check out this TR article and the discussion for more ideas:

https://www.techrepublic.com.com/5100-6255-5030674.html

If you are running Windows NT, this is not a real issue, as NT has no built-in USB support.

Chas

by narif

Yeah that's your only solution. but considering you are in pakistan, someone will get the data you are trying to protect sooner or later. I'm speaking from experience.

by djent

You can also disable the USB driver in device manager. This only works in NT4, W2K and XP Pro logged in as < then Admin. You can also uninstall the driver.

by evilspamman

Won't Windows auto-find the USB port the next time the computer is rebooted? Also, if the user was motivated enough he could go back into device manager and RE-install the driver.

by djent

These machines should not be logged in with Admin rights and auto detect can be disabled. The bottom line is that a determined individual can and will bypass all efforts to limit access to hardware, that is why dumb terminals are popular.

by navjun

No, no one can enable them if you log in as admin and disable them, but you have to make sure the users are not loged in as admin and they don't have local admin rights, and if they do they will be able to enable them. I think you can do all these from your own PC over the network and you don't have to actually go in and each pc. you just need to use MMC and connect to those PCs and disable the USB drivers by right clicking on them and choosing disable.

by intpbmz

Is it possible to remove the external ports. Experiment on one system to see if it works. I know that it my not be feasible, but it's a suggestion.

This discussion is closed to new replies.