Discussion Locked

How to configure Internet setting for sh

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to know how Installing network (LAN)and connect to Internet in windows 98?
I already installing hardware that should be installed for a network. I have 2 comp that connected with hub.
But it couldn't worked. May be in windows 98 setting. But i don't know how????
Please help me on this problem!!! Thank you very much for your attention.

17 replies

by mphoffar

I'm assuming you used ICS for your sharing software.

Basically after that's installed on your host it should've assigned an IP address to one of the nics on that station. Something 192.168.0.XXX

The second station should have everything setup to obtain automatically. The default for ICS is to dole out IPs via dhcp

To see if this happened, you can run winipcfg. This should bring up an IP of something like 192.168.0.XXX (Where XXX is different then your host). If this did not happen, then either the host isn't seeing the client or ICS isn't installed Correctly.

Your network applet can only handle 4 bound adapters, so if there's more then that, ICS won't work. You should only have one nic, the ICS and either a modem, another nic, or an internal dsl or cable adapter.

When configuring it, a mistake I see some people make is, if your connecting with a DUN connection, it's better if you choose sharing modem with ICS. I have a DSL that's pseudo-always on. I have to manually connect it w

by dmiles

Once you have the network hardware installed,you will go to Start>Control Panel,double click the Netwok icon,choose properties and configure by selecting tab ,Adapter,Protocols,Client for Microsoft Networks,consider the best protocol to install,NetBEUI is best protocol to install when connecting only two computers.
for more reference choose Help and type in Networking

by 9878445

what kind of internet connection do you have? you will need at least 2 network cards and 1 modem or 3 network cards. 1 machine will need to be the server (one connected to the internet) and the other will be the client (accessing the internet through the server) set the ip addressing as follows server=192.168.0.2 with a subnetmask of 255.255.255.0 and set the client pc to 192.168.0.3 with a subnetmask of 255.255.255.0 then get some software called sygate (best I have seen) and install it on theserver in server mode and install it on the client in client mode if you have a dial up modem dial up and the other pc should work if you have a cable modem let the 3rd nic card (the one in use for the cable modem) obtain an ip address automaticallywith DHCP.

by spiceman

You need Windows 98 second addition or Windows 2000 to achieve what you need without a third party program. In windows 98 second edition you need install ICS - internet connection sharing - which is not installed by default. Than you can use the IP address schemes suggested by the other people. This program allows you to share one internet connection whether its a modem or a cable modem or DSL.

Good luck.

by zandy.mcallister

I had to get a crossover cable to connect the two computers together in order to get the ICS to work. I just connected the two computers and skipped the hub. Might be worth a shot!

by jyimcse

With a hub or cross over cabling, ICS will work. For first timers, get the network setup. Use netbeui, but also have TCP/IP installed for the NIC and have it obtain IP address automatically. Then go to control panels -> add/remove programs -> Windows Setup -> Internet Tools -> check mark Internet Connection Sharing. This is only for WIN98SE. This will load ICS and the wizard that will setup up with the rest. Your host computer will be set with IP address 192.168.0.1 and it will dynamically set the other computer. What kind of Internet access do you have, Dial-up or DSL?
I have Pacbell DSL with Enternet 300 PPPoe. I went out and bought a Linksys etherfast cable/dsl router for $150.00. This is a 4 port 100Mbs switch and a router. Plug in the ethernet cable from the DSL modem to the router and you have always on connection even with PPPoe dialup DSL. Any computer can access the internet, you don't need a host.

by ypark

1) you need at least one ISP connection on the computer

2) if you don't have ICS you need to at least get some kind of proxy software ($30-$75)

3) follow the stinking instructions from the proxy software

by gkpaws01

As far as the networking thing goes the advice that was given seems sound. The only suggestion I have to offer is this: Don't waste your time with the windows internet sharing software it will only drive you crazy, get some type of aftermarket software like wingate. You can abtain this from www.wingate.com, the new version is 4.01 I think. If you have any questions or problems about setting up this software feel free to email me.

This discussion is closed to new replies.