Question Locked

How to configure IP address on HP laserjet 8150

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have moved locations, and though I was able to reset the printer to default config, I need help adding the new IP address. Our ISP gave us 5 static IP addresses, one of which I am assuming can be used on the printer, but none of the methods I have found are working.

I can get to the config network = yes, but I don't seem to have the same set-up as the instructions I have found do.

Any ideas?

13 replies

by Former member

Use Nat and reroute to an internal address, say in the 198.x.x.x or the 110.x.x.x range.

Your printer is just basically another computer in your network. Treat it like one with its IP. Save your static IP for something you need.

by gginny

I used the IP address it gave itself. That worked.
What is NAT?

by tintoman

Share your printer with us?
If you assign a static public IP everyone on the internet will be able to print from your printer

by gginny

I used the IP address it gave itself. That worked.

by nimmo

You don't want to use a public registered IP address, you want to log into your printer and give it an available private address making sure it is on the same subnet as the rest of the network.

If you don't know the existing IP address print a configuration directly for the printer then web into it and change the address settings there.

by wesley.chin

The printers here have static IPs. They are configured via each printer's Properties, then Ports, click Add Ports and make your changes. Let me know how it goes.

by gginny

Hi, that's how I did it. Thanks for the input.

by ealbad

I have tried on the printer using the menu key and gone to the EIO menu and I am not geting it

This discussion is closed to new replies.