Discussion Locked

How to do reverse lookup on my DNS ?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do I know that my reverse zone is OK ?
How do I test it from outside ??

7 replies

by beermonster

Hi,
to test reverse lookup, use the
nslookup "ipaddress"
command at the command line, where ipaddress is the target IP address without the quotes. As to testing from 'outside', I'm assuming you mean over the internet. For this to work, your client on the internet will need to have your dns server in it's ip config and your dns server will need to be visible from the internet - which is a security nightmare......

by lintadsl

To test your DNS from out side;
from your machine, open dos prompt console,type nslookup, Then type "server YOUR IP of DNS" enter.
Now your machine is useing your DNS server. Type "www.yahoo.com" if you get respond, Good to go.
To test your DNSreverse lookup;
from any machine uses different DNS server(you can change this in nslookup command anyway), type
your domain name(www.your.domain.com). If you get respond, it works.

by petronil

if you want to test it then use nslookup IPADDRESS and if you want it outside then try to go to nitous.digex.net and trace your ip address but you could only do this if your dns resolves the address.... good luck

This discussion is closed to new replies.