Question Locked

How to ensure AGP bus is on?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I've got a Dell Precision 330 Workstation running Windows 2000 Pro, and I installed an ATI Radeon 9550 AGP 4X card. When I run the ATI Catalyst Control Center, it tells me the AGP bus is off.

How do I ensure the bus is ON and running at full 4x speeds?

Thanks!

KF

6 replies

by 1bn0

Your post sounds inconsistent.

If the card does not work and you are using the on-board video, then check the bios to see if the AGP has been disabled.

I don't recall that being an option for an AGP slot but then I've never looked for it.

If the card works then I would simply suspect the Catalyst Control center is wrong or incompatable with the chipset on your motherboard.

by vrodkaraf

Well, the graphics card is working. But I do not know if I'm getting the proper 4X acceleration out of it. My understanding is that the acceleration is changeable (down to 2X), so isn't it possible to turn it off?

But the comment about the Control Center being incompatible is a good guess. I'll send a trouble ticket to ATI and see if they can help.

Thanks!

by jamesrl

Your bios may or may not tell you the AGP speed setting. You could also try one of the many HW diagnostic tools out on the net.

There is an alternative to control center - google ATI Omega drivers - they have the same base driver core as ATI's drivers, but use an alternative to CC. I much prefe them, and they don't require the .Net framework.

James

This discussion is closed to new replies.