Discussion Locked

How to get my modem working

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i have a packard bell pc which had windows 95 in it ....it was upgraded to windows me but i can't get my modem to work.What do i need to get it working?

9 replies

by thechas

You need to identify the specific hardware for the modem, and install the Windows ME version driver for it.

If this is an on-board, or AMR (audio modem riser) style modem, you may have to disable it, and install a separate modem.

If it is a plug-in card, you may need to use the modem chip manufactures 'reference' driver.

A good site with links to modem drivers is www.modemhelp.org

You may also need to identify the chip-set on the motherboard, and install the drivers for it.

Chas

by choppit

You'll need to open the box and identify the modem card. Then look to the PB website for driver downloads. Some PB PCs from oround 95 have ISA bus modems mounted on a riser as The Chas has mentioned.

by gbuck

Download and install a file from microsoft.com called nologo.exe. I had the same problem and this fixed it.

by quaint_data

does windows me like 98 have an add new hardware option? if you know the name of your modem coose no I will select it myself, then choose your modem and the appropriate drivers, if windows installs the drivers, then go to control panel modems and run diagnostic, click your modem at the com and more info, windows will attempt to cheak your modem, if results are ok, your surfing again. Otherwise you will need the cd your modem came with and do the same again only use cdrom.

This discussion is closed to new replies.