Discussion Locked

How to have a webpage in w2k server?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After adding it to IIS , and it works on an intranet basis, how do i configure it so it can be on the internet? is it a matter of just telling the URL provider with an IP address? is there more? My goal is to run a websige from my server and a webcam. if you know, pls.

thanks

7 replies

by timthetoolman

What kind of connection do you have to the internet? Dial-up, DSL, cable?

The problem here is likely to be that in order to have a permanent website, you need to have registered a domain name... something like mywebsite.com.

This gets entered into the DNS servers and propogated around the world to the appropriate servers.

Unfortunately you also need to supply a static IP address... This is where your problem lies... if you have cable or DSL then your IP address will be dynamic. ie. allocated to you when you first connect.

If you rebooted, then you'd likely get a different one.

So you see there's no easy way for DNS to know where your web site actually is at any time!

Having said that. If you dont reboot then you can let your friends know what IP address you currently have and they'll be able to use your web site - probably right now!

eg. http://144.156.1.36/

Hope this helps...

Cheers,
Tim.

by gkebuti

Alright. I do have a Cable dynamic IP address, but its been the same for 8 months now, even when i reboot my server (wich i rarely do) so i aint worried about that. Whats confusing is the URL provider wich i bought the .com from is only asking me for 2 DNS servers addresses. sure my cable ISP has dns info but i doubt thats what they mean. running w2k adv server myself, can i process this DNS myself without going to a third party server?

ps. by the way the address http://144.156.1.36/ doenstwork?

thanks in advance,

by csmith

A dedicated ISDN line can run a dedicated IP address.
A little hardware information would be helpful.
Could you please post a comment, with the additional information?
Regards, Chris

by gkebuti

Alright. I do have a Cable dynamic IP address, but its been the same for 8 months now, even when i reboot my server (wich i rarely do) so i aint worried about that. Whats confusing is the URL provider wich i bought the .com from is only asking me for 2 DNS servers addresses. sure my cable ISP has dns info but i doubt thats what they mean. running w2k adv server myself, can i process this DNS myself without going to a third party server?

thanks in advance,

by timthetoolman

Hi,

OK, you actually have two problems... one is to do with how you register your domain name. I've since found that there are providers out there now offering "Dynamic IP address-domain name" translations. If your IP address changes, you somehowlet them know and they'll have it changed for you.

Not sure how that process works in detail yet as I haven't looked into it.

...but your main problem at the moment is that your site doesn't work.

I cant get to your site - and further more,I cant ping it either.

The first thing that springs to my mind is... Do you have a router between you Win2k Adv server and your cable modem?

If you do, its likely doing NAT, which effectively hides your server from the rest of the world...

If not then let me know what setup you DO have and we'll troubleshoot it.

Cheers,
Tim.

by gkebuti

exact setup is cable connec, sharing with software router Winroute.
UPDATE: IP address doesnt change. Ive asked the URL cie to re-direct the website to my ip address. www.roro.ca using theyre DNS servers. THAT worked!!! only thing though, it screwed up my intranet settings??? everything gets diverted to that page??? i also want to run multiple websites from that IP. seems IIS allows this. but these settings confuse me. Header site and all.would you know a good IIS troubleshooting website or service?
regards,
GK

This discussion is closed to new replies.