Question Locked

how to measure (the volume of the problem) ????

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently graduated from university (majoring in computer science) , and i just got a new job, i was hired as a (customer care project coordinator)in the main telecom provider in my area.. may main responsibility is to support the customer care department (Call Center to be spicific), by training them on specific application or arrange with other departments to provide some modifications on the software to help them reach the highest effeciency ..

anyways.. my boss asked me to find a way to measure (the volume of the problem) in the call center ,and try to find a way to solve it.. what did he meant by measuring the volume of the problem??? can any one help me with some ideas????

9 replies

by toivo talikka

but, depending on his management style and the culture of the workplace, that may not be the first option that you want to pursue.

I think, and others will probably have other ideas, that if the Call Centre produces management reports, which I hope it does, the reports may perhaps not reflect the volume of the problems processed or the overall workload of the staff as accurately as they should, and your manager would like to know why.

If your manager wants to be able to estimate the workload in the Call Center, you need to have some statistics collected from the past few months. You may want to classify the problems into categories and record the elapsed time and the actual time spent on the problem, plus some relevant costing information.

Management usually wants to know the cost of the service provided, to be able to charge for it internally inside the company.

Customer feedback could also be a variable you want to measure, to get an idea of the level of service and set realistic performance targets for the teams in terms of number of calls taken and percentage of problems solved/closed within say 3 days.

by neno.1

thank you for you reply, it was really helpfull.

I beleive that u did knew what he exactly wants. bacause our Call Centre does produces management reports, but the reports are not reflect the volume of the workload of the staff, and yes my manager would like to know why.

even that we made some modification on the system so it can help us to know the reasons of the work load, (what we did is to make every Call Center Advisor to put a LOG on the system of the case or the problem or the inquiry that he is handling, so we can know what kinds of problems that are majorly is creating the load).

but the fact is that these LOGs did not help us to know the volume of the problem, because

1. there is so much cases that confuses the advisors of what logs the have to put, so the results are not accurate.(for example. if the customer called because he can send sms , and the adviosr found out that his line was Barred from sending, so the advisor can put two logs (log 1 : can not send sms), and (log 2: the line is barred).. thats one of the reasons that the numbers are not accurate!

2.Repeated Calls are also counted. for example if the customer called because he is having a problem in sending SMS, the advisor gave him a (solution 1), then the advisor wrote a log says (can not send sms), then the same customer called again because his problem was not solved by(solution 1), then the advisor gave him (solution 2), and he wrote another log said (can not send sms).. so the logs of the repeated calls are also counted again and again in the problem volume!!!!

so what are the modifications that i can do on the system so the repeated calls are not counted in the problem volume.. and also what can i do to make Logs that might be from silimar case to integrate into one log in my report to measure the volume of the problem!!!
.. can you also give me an example on how to do these statictics!!!

thanks

by delbertpgh

Since your boss put this issue before you, he probably has something in mind. He must think there is some kind of problem; what is the problem?

You need to interview him, and understand his job, to know how he is feeling the pressure of this "problem", how it is keeping him from achieving his objectives, and how the call center helps the organization (that is, what is the mission of the call center.)

Knowing this, you should be able to identify problems more exactly, and means of measuring them should be self-evident, if not simple. Remember, as chief of the call center, your boss is your customer, and your job is to satisfy your customer.

by neno.1

the problem is concerned with the workload on the call center..

even that we did some modifications on the sysem to clarify the reasons of this work load (what we did is to make every Call Center Advisor to put a LOG on the system of the case or the problem or the inquiry that he is handling, so we can know what kinds of problems that are majorly is creating the load). but the volume of each case or problem is not accurate due to the following reasons:

1. there is so much cases that confuses the advisors of what logs the have to put, so the results are not accurate.(for example. if the customer called because he can send sms , and the adviosr found out that his line was Barred from sending, so the advisor can put two logs (log 1 : can not send sms), and (log 2: the line is barred).. thats one of the reasons that the numbers are not accurate!

2.Repeated Calls are also counted. for example if the customer called because he is having a problem in sending SMS, the advisor gave him a (solution 1), then the advisor wrote a log says (can not send sms), then the same customer called again because his problem was not solved by(solution 1), then the advisor gave him (solution 2), and he wrote another log said (can not send sms).. so the logs of the repeated calls are also counted again and again in the problem volume!!!!

so what are the modifications that i can do on the system so the repeated calls are not counted in the problem volume.. and also what can i do to make Logs that might be from silimar case to integrate into one log in my report to measure the volume of the problem!!!

thanks
Haneen Malhas

by delbertpgh

Don't ask me what that would be, because I'm not in the call center business, myself. However, there are lots and lots of call centers in the world, and I'm sure there is software to service them.

Since you're in Jordan, you may have some trouble with Arabic script.

Your problem and call records should be indexed by the caller's telephone number, plus date, plus a sequence number (in case he logs two different problems on the same day.) Then you can look backwards at a caller's complete history, knowing only his phone number. That is a data item your caller is sure to be able to tell you, even if he has lost his call ticket number.

You can also do plenty of useful management reporting with this. Get good with Crystal Reports, and you can see who your worst customers are, what your most common problems are, and if problems are concentrated in certain telephone exchanges.

by neno.1

thanks for your advice.. I will work on it and see what can we do.

and i will try the Crystal reports you told me about.

and i dont think that im going to have a difficulty in finding a call center management software, becuase we already dont use systems with Arabic script. all our systems and reports are in english (specially that im working in a French-British corporation) :)

thanks again

by delbertpgh

Are the people who call you from England and France, or are they Jordanians?

by neno.1

all the customers are from jordan, because im working in one of the leading telecommunication providers in my area ,I work within as a Customer Care project coordinator in the Mobile Service Unit

( which means that our customers are the mobile phone users inside Jordan).. as u can see we are not outsourcing shop .. the number of our subscribres now exceeded (2 million subscriber)!!! in a country with a population of (5 million) only!!! ... so its not weird to have such a work load on the call center. i just want to be accurate what are the main reasons that this work load is continu increasing even that we made so many modifications on the system!!!

This discussion is closed to new replies.