Discussion Locked

How to see data in IBM RS/6000 (AIX)

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My hard drive crashed. Now I can not boot. The LED is 223-229. I just want to access my data in the IBM RS/6000 that is running AIX. Any suggestions?
Can I connect two hard drives ( one is new bootable hard drive, another is my crashed hard drive )and access my data? what command should I use?

Thanks

7 replies

by cpfeiffe

If you can boot off of another drive, can you see the crashed drive, physically? Use the devices menu under the smit program to see if you can see the drive. If you can see the drive it should have a logical path for each slice (file system). Youcan in turn create a directory on your bootable disk and mount a slice to that directory. You can do this as many times as you need to see all of the slices. If you need more help or details reply to my email address (current alias) with any questions you have.

Good luck

by femo

This may be due to a corrupt bootlist, missing boot record or failed disk.

Suggestion:
1. Connect the crashed disk.
2. Power on system and inser BOS install disk
3. Restart system in service mode (Turn key to Service mode if available before restarting or press F1 or F4 when system is coming up).
4. Select Maintenance menu
5. Select your root vg and access the root vg
6. If you do get in to the system then use lslv -m hd5 to find out boot disk.
7. Then bootlist -m normal hdisk# (hdisk# is the disk reported by lslv -m)
7. Return key to normal mode or just go ahead to restart system.

Do give this a try.

by femo

This may be due to a corrupt bootlist, missing boot record or failed disk.

Suggestion:
1. Connect the crashed disk.
2. Power on system and inser BOS install disk
3. Restart system in service mode (Turn key to Service mode if available before restarting or press F1 or F4 when system is coming up).
4. Select Maintenance menu
5. Select your root vg and access the root vg
6. If you do get in to the system then use lslv -m hd5 to find out boot disk.
7. Then bootlist -m normal hdisk# (hdisk# is the disk reported by lslv -m)
7. Return key to normal mode or just go ahead to restart system.

Do give this a try.

This discussion is closed to new replies.