Question Locked

How to Uninstall Linux Limpus from my Laptop

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a mino loptop that has a defauld OS of Lunux Limpus. I wanted to reformat my laptop and out a Windo XP on it. But I don't know what to do. My Lapto doesn't jave CDROM all is USP ports. Please let me know the detailed "How to's" so that I can install XP in my MiniLaptop.

18 replies

by thumbsup2

Without a CDROM in the Mino/Mini, you'll need to purchase an external CDROM to boot from. Before you go to that expense though, check to see if the BIOS will allow booting from an external device. Then, check to see if the rest of the Mino/Mini lives up to the minimum system requirements of WinXP (i.e.; RAM, HDD Space, Processor speed). Then, check the Mino/Mini manufacturer's web site to see if they provide WinXP drivers for all of the hardware inside that thing. You'll need Mother Board and HDD drivers at the very least.

Once you've satisfield those requirements, see if you can find a copy of WinXP Retail to purchase. If you purchase a used copy of WinXP, be SURE to get the installation key that goes along with THAT CD. This version of WinXP will allow you to boot to the CD, provide the drivers for the external CD so it can read the disk (in the external drive) and eventually allow you to format the HDD and install it.

Good luck finding all of that for a Mino/Mini Laptop which may or may not have been designed to run WinXP.

by oh smeg

Boot & Nuke

http://www.dban.org/download

get the version suitable for CD & DVD Media and then burn it to a Disc in the USB Optical Burner.

Restart the system and enter BIOS by pressing either the Delete, F2 or F10 Key as listed on the POST Screen and set the Boot Order to USB then HDD. Then save the setting on Exit. and insert your Copy of Boot & Nuke and when prompted type [b]Autonuke[/b] this will wipe the HDD by writing zero's to every sector destroying the existing Partition Information and all of the Data.

When the HDD is wiped insert your XP Home Install Media which has been modified to run on Net Books and install directly from the Optical Drive.

If you do not have the XP Home Install Media supplied by this Net Books Maker you can use a XP Home Install Disc and you will have to Download your Specialized Drivers for Windows XP and your Hardware. Try the System Makers Web Site for these. Then save them to some external Data Storage Form and remove from the system before you wipe the HDD with Boot & Nuke.

After you have loaded the Windows XP Home plug in the Device that you saved the Drivers to and install them one at a time till they are all installed. [b]Note[/b] if these drivers come as a Zip File you have to decompress them before wiping the HDD with your current OS on.

[b]Do Not[/b] attempt to load XP Pro as these units are not designer to work with this OS as they lack sufficient resources.

Col

by c157pm

Hi, I downloaded the dban autonook. I set my minilapttop (with linux pimpu) to boot from USB flashdrive but I get an error "Boot Error" and the nothing happens? Please help!

by oh smeg

It is possible that some HDD Types are not available to use with Boot & Nuke.

You may like to try Kill Disc which may support your HDD Type or it may not.

http://www.killdisk.com/downloadfree.htm

Without knowing what we are dealing with it's more than a bit hard to give specif answers. Also XP may not install to this HDD without the necessary Drivers. If the HDD is a SSD it may have some issues that we need to know about and the type of Drive Format that it is would also be useful.

XP doesn't natively support SATA Drive Types so it may be necessary to use a SATA Driver to be able to even load XP and if there isn't a XP Driver available it may not even be possible to load XP at all.

Even if there is a XP SATA Driver available you'll have to make a Slipstreamed Install Disc as the Net Books do not have the option to use a Floppy Drive so you'll need to use something like nLite to make the Install Media.

http://www.nliteos.com/download.html

Or you could try using one of the Boot Disc Available though it too may not see your HDD.

http://www.bootdisk.com/bootdisk.htm

OH and the Instruction Manual that came with this unit should explain how you connect to your ISP. It's not that your ISP can not support a Linux Connection it's just that they do not know how to connect this particular device to their network. The Forums for your Distro if nothing else will the necessary ways to connect to the ISP and get a Internet connection but this should be included in the Users Manual with the Net Book.

You may however need to find a Suitable Driver if you are attempting to use a USB Type Device to enable a connection to your ISP.

by rob miners

if it is only 8GB I wouldn't even bother. Unless you use nLite to cut down the Operating System size and you may need to slipsteam your Sata drivers. be very careful of what you remove.

How To: Slipstream your XP installation

Download nLite

http://home.midmaine.com/~nlite/nlite/nLite-1.4.8.installer.exe

http://www.nliteos.com/guide/

These are the steps that I took

Download the Sata Drivers from the manufactures web site.

Installed Nlite

Extracted Sata Drivers to a folder named Sata using WinRar. http://www.rarlab.com/download.htm

Copied the entire XP CD to a folder named XPS

Ran Nlite and Browsed to the XPS folder, Next, next then selected Drivers and Bootable ISO click next

At the Drivers Tab click insert, single driver and navigate to the folder with the inf for windows XP.

Highlight it and select open and select next. Select Textmode driver and select the XP Sata driver and click OK.

Click next and Yes to apply changes, next and select Make ISO. Burn it to CD using Nero or any other Software that will support the ISO Image.

How to burn an ISO Image:

http://www.ubcd4win.com/burn.htm

by c157pm

My Minilpatop has 80G capacity. I really wanted to erase the Linus Limpus from it. I'm not familiar with Linux OS so I feel dumb using it and our local wireless DSL provider don't have support to Linux so I can't connect to internet. I tried using the dban autonook erase but I encountere boot error when I boot up my laptop. Please help!

by older mycroft

And now get a "Boot Error" ??

Have you purchased a USB optical drive yet?
Have you got a Windows XP install disc yet?

by jdclyde

We need to know what hardware you are trying to do the install on to be able to accurately give you a hand with this more than generalizations.

Next, do you already have the external CDrom?
Do you already have the copy of WinXp?

Keep in mind, if you do not have a legal copy of XP, no one here will help you "find a key".

by c157pm

Here is the scenario: I bought a Wizbook, Redfox Minilaptop with Linux Limpus as its default Operating System. I wanted to change OS from Linux to XP Home, (I already got the prod.code for the XP Home). My laptop did not come with CDROM. It all uses USB ports. I o dont; have USB optical drives but I have alot of USB flash drives 4G each. I wanted to get an advise on how to erase totally or perhaps format if its necessary. First I was advise to use autonook but it would not work. Today I receivd an advise to use KillDisk, I will try later of this day if it can boot up. Let me know if you have easy ways and means how to erase the linus from my laptop. My HDD is 80G. I don;t know how many partition it has. I dont know how to navigate Linux to get info on how may partition the HDD was. Thanks alot for your support guys!

by older mycroft

If you don't have an external optical drive?

You can't magically transfer the XP installer disc onto a 4GB thumb drive without an optical drive to read it from.

And once you've got an optical drive you won't need to transfer to the thumb drive anymore.

But you still MUST make sure you can find XP Drivers for ALL of your system components first. Otherwise XP will not run.

by oh smeg

http://www.sulit.com.ph/index.php/view+classifieds/id/745470/FOR+SALE+WIZBOOK+MICRO+LAPTOP+8%22+AND+10%22+NOW+AVAILABLE

and called a [i]Red Fox 10? Wizbook[/i] is what you have got though it does show only a 60 GIG HDD not a 80 GIG as you say you have so I may have the wrong model of [b]Net Book[/b] here.

You need to use a Wiping Utility or some other Utility that can see the HDD whatever it actually is in this machine. Apparently the BIOS doesn't support the HDD Format Natively so you need to install drivers with whatever you use to wipe the HDD or just remove the HDD and fit it to a Suitable System or External USB Caddy to remove the partitions on it.

You may be stuck with using a DOS Type Utility and editing the Autoexe Files to get the HDD recognized in this unit though you could look in the BIOS and see if there are any settings for the SATA Drive Format and change those. Net Books generally have a SSD not a Mechanical Drive so I'm assuming here that these have a SATA Interface to more closely match the Speed that they can be read to get the best performance out of them. But as the Technical Information is Non Existent on these it's just a guess.

As I suggested above try Kill Disc or one of the Boot Disc's available at the listings I gave.

While this unit will run XP Home you will find it far slower than it is with Linux Installed. This has very limited Resources available and the AMD Series Type CPU's that are used in this device [b]Are Not[/b] as powerful as the equivalent 500 MHZ CPU was when a 500 MHZ Durion CPU was new. They where built to conserve Power so they do not have the same Transistor Count or amount of L2 Cache that the older 500 MHZ CPU had. They also run considerably cooler than what the old 500's used to run at again to conserve Battery Power. The biggest single part in these is the Battery which can power these things for up to 8 hours with moderate use and no USB Devices plugged in well at least no USB Devices that derive their power from the Net Book.

OH BTW Linux Typically has 3 Partitions one for the Kernel one for Applications and one for Data. Though this unit may have 4 Partitions with the fourth being the Recovery Partition so you can rebuild the Unit with just a couple of Key Strokes.

The problem here is the M'Board or at least the BIOS that this unit uses does not natively supporting the HDD that is fitted here.

Be prepared to live with a very slow system as the makers install Linux

1 Because it's far cheaper than Windows

2 Because it requires far less system resources than Windows.

3 Because they have to pay even more for the Cut Down Version of XP Home that M$ supplies for these Net Books.

4 Because most people consider them useless when loaded with XP Home.

Provided that you understand this it will be OK but if you expect Windows to work like Linux and be as fast you are going to be severely disappointed.

Remember to make a Copy of the Nix Recovery Partition if there is one and you didn't get any Recovery Media which is common with these units.

It would also help no end if you could find out who actually made the Chassis as these are what are called White Books for want of a better word. Meaning that they are assembled to the configuration that either a Country Distributer wants to use or a reseller wants. Basically you add a CPU, RAM and a HDD and you have a working system.

The Makers Name & Model Number should be on a Sticker on the Bottom of the unit.

OH BTW [b]Windows Compatible[/b] only means that it can run the [b]Core Components[/b] of Windows it doesn't mean that it can run any applications or even work at a reasonable speed. To be Windows Compatible it just needs to be able to run the Core Windows Kernel and it doesn't matter if it takes 2 days to load it if it can run it it is [b]Windows Compatible.[/b] M$ did the same thing with the Vista Compatible program. :)

Col

by c157pm

I already have a bootable ISO image in one of my thumb drives so installing XP to the MiniLaptop is not a problem. My real problem is on erasing the Linix from my Laptop. I recevied an advise that XP home will work on minilaptop. Thanks for reminding me anyway. I appreciate it.

by older mycroft

Maybe I've got the wrong end of the stick here but you would need a virtual drive in place to run the ISO image.

That cannot be accomplished at boot because the system is empty.

*Have you actually tried booting from this USB drive yet?

< * >

by c157pm

I already tried to boot the Linus using Unibootin from http://sourceforge.net/projects/unetbootin/

It load up to the command promt but I dont know Linux command so it renders no use to me. I will try the KillDisk instead. I will tell you if the Killdisk works. Thanks

by c157pm

This was my Specs

WizBook 1020i X2
10.2″ display screen (1024?600 pixel)
Intel Atom N270 1.6GHz
1 GB RAM
80 GB SATA HDD
1.3MP webcam
WiFi 802.11 b/g

Hey, thanks for the advise.. I'll consider them.

by oh smeg

SATA Drivers to access this HDD.

Or you can move the HDD and attach it to any computer that uses a SATA HDD to delete the Partitions.

Or you can fit this HDD to a external USB SATA Caddy and delete the partitions that way.

What I said above about the AMD CPU's for these Net Books also applies to the Intel Atom Processors.

Col

This discussion is closed to new replies.