Question Locked

HP Pavillion Webcam with Windows Live Messenger Problems

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

So I just purchased an HP dv6000 series laptop with an internal webcam/mic. The cam works fine on Quickplay, but I get an error when I try to use it on Windows Live Messenger.

"Your conversation cannot begin because your camera is currently in use or not plugged in. Make sure your camera is available and try again."

I don't know what could be using it since the light isn't on.

Any ideas? Thank you.

20 replies

by theoscar

Hi!

Please let me know if you solved your problem. I bought an HP tx1120us and am having the same problem. As soon as I start using MSN, my webcam will not work in any application until I restart my computer.

by njmarchetti

I also have the problem with my dv9000 laptop webcam. Sometimes it works fine with Live Messenger, but other times it gives me the following error message:

"Your conversation cannot begin because your camera is currently in use or not plugged in. Make sure your camera is available and try again."

The only way I have found to get it to work again is to Restart my machine. Currently running x86 Vista Ultimate. I am going to upgrade to x64 in a few weeks, so I'll see if it gets any better.

by chick_flick8445

this happens to me too, do you knwo if it happens with normal msn or just live? cuz if it works with non live msn

by zirans

if you have windows live messenger running it won't work. install another messenger, like yahoo and either uninstall windows live messenger or disable it to run at startup. then restart your computer. that should fix it.

by njmarchetti

I am still having this problem intermittenly, so I tried disabling WL Messenger but the problem still persists. I restart usually fixes it temporarliy but it is only a matter of time before the webcam stops working again. I received this answer from HP, but it has not fixed the problem:

Click on Start Menu >> All Programs >> Accessories and then on Run.

In this, type the command below and click on OK : services.msc

The Services window opens up. In this, locate the serivice with the name " Windows Image Acquisition Service (WIA) " and check wheather it is running or not...

If it is not running, right click on the service and select Properties window. In this, select the Startup Type as Automatic. Now, click on the Start button in the same window.

Now, go to the Recovery tab in the window. In this, select Restart the Service for First, Second and Subsequent failures. Now, click OK to close the window and close the services window.
This should resolve the issue with the webcam in the Notebook.

Has anyone managed to find a way to get their built in webcam to work consistenly on a dv9000?

by robotekno821

Yeah, same problem. I really want to use my built in camera, but the darn thing is being used by someting that i don't know of.

errrr....

by hei

i tried the method of
Click on Start Menu >> All Programs >> Accessories and then on Run. and type the command below and click on OK : services.msc

when i done all the settings that required.

but it really still doesn't work..

by vladim5

I have solved this problem on my Pavilion 9205CA by uninstalling live messenger 8.1 and installing previos version 8.0, since then all programs, like skype and yahoo messenger running just fine.

by mvrachid

Try this (I have a Tx series, but it might work on the others too...)
1) Go to Control Panel > Scanners and Cameras
2) Click on Add Device and Have a Disk. In my case, on the right, I saw the "HP Webcam" option. If you don't, insert your HP CD with drivers, then click Next.
3) Windows will ask you for reboot.
4) After that, Messenger is able to see your camera.

Good luck, folks.

by mercury1940

I have a fresh HP pavillion notebook with Wiondows Vista, purchased new on 11/26/07. Webcam works with Quickplay. Installed MS office and Norton antivirus and WLM (windows live messenger) (nothing else). WLM could not find the camera, much less use it. I installed Skype, which found the camera and seemed to be using it, but the transmission was just a black screen. I uninstalled WLM as the previous post suggested and now Skpype works perfectly.

Sounds like poor coordination between microsoft and HP. I suspect HP will provide a driver patch to fix the probelm.

by canadistan

umar ahmed: where do i find the serial code
umar ahmed: oh ok
umar ahmed: XXXXXXXXX
umar ahmed: that's the serial
umar ahmed: product XXXXXXXXXX
umar ahmed: i took it from the sticker on the box
Maya: Thank you for the information.
Maya: Please give me a few minutes , I need to do some research on the issue and will get back with you shortly.
umar ahmed: ok
Maya: Thank you.
Maya: Your patience is greately appriciated.
Maya: Thank you very much for waiting.
umar ahmed: no biggie =)
Maya: To resolve the issue I recommend you please perform the below trouble shooting steps after we end this chat session.
Maya: And for your convenience I will mail you a copy of this entire chat transcript to your E-mail ID once we finish our conversation.
Maya: Here are the steps.
umar ahmed: ok
Maya: Step 1: We need to enable the Windows Image Acquisition Serivce. Here are the steps to enable the Windows Image Acquisition service.

1. Tap Window key (flag key on the keyboard) and R key on the keyboard, at once.

2. You would see the Run window on the screen.

3. Type SERVICES.MSC and hit enter.

4. You would see the services window on the screen.

5. Double click the "Windows Image Acquisition (WIA)" service, and under the startup type select Automatic.

6. Click on "Start" button if it is stopped under Service status

7. Click on Apply and Ok.
Maya: Step 2: We need to uninstall the webcam drivers. Here are the Steps Uninstall the Webcam drivers from the device manager.
Maya: 1. Click on start and click on Control panel.

2. Click on "the Classic View" on the top left side of the control panel.

3. Double click on the "Device Manager" icon in the list.

4. Click on + next to the Imaging devices. Now you would see one HP Pavilion webcam or more then one web cam listings under the Imaging devices.

4. Right click on each HP Pavilion web cam and click on uninstall. And confirm un installation if it prompts. (Click on Yes.)
Maya: Step 3: Here is the link to download the Latest drivers for the Webcam.
Maya: ftp://ftp.hp.com/pub/softpaq/sp34501-35000/sp34746.exe
Maya: Please make sure you copy and paste the complete link in the address bar of a new Internet explorer window.
umar ahmed: allrighty
umar ahmed: you said you will send a copy of this convo to my email right?
Maya: Step 4: We need to reset the Bios after reinstalling the webcam drivers. Here are the steps to Reset the Bios.

1. Restart the notebook.

2. Tap the F10 key as soon as the HP logo appears.

3. Using the arrow keys, navigate to Exit Menu, select "Load Setup Defaults" and select "Exit Saving Changes"
Maya: Step 5: If the issue still persists, you need to reinstall the Bios. Here is the link to download the file to flash the Bios.
Maya: ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38174.exe
Maya: Please make sure you copy and paste the complete link in the address bar of a new Internet explorer window.
Maya: I am done with providing you the steps.
umar ahmed: ok i'll do as you say
Maya: After performing the above steps in the given order must fix the issue, If the issue persists please get back to our chat support. Every one in our department will be glad to assist you further.
Maya: I will send you the chat transcropt to your E-mail.
Maya: Please confirm me your E-mail ID: XXXXXXXXXX@hotmail.com
umar ahmed: A thousand thanks maya
umar ahmed: yup that's my email
Maya: Thank you for confirming the E-mail.
Maya: My pleasure.
umar ahmed: Cheers! have a good day
Maya: ]
Maya: If you require any further help please getback to us any time. We will be happy to assist you further.
umar ahmed: oke dokey
umar ahmed: got the email
umar ahmed: ciao
Maya: Mail was send to XXXXXXXXXX@hotmail.com
umar ahmed: yup
Maya: Thank you for using HP Total Care and providing us an opportunity to serve you through Real-Time Chat.
umar ahmed: got it
Maya: Have a wonderful time ahead and Goodbye.
umar ahmed: thanks again

by suyasuya28

I just got a Pavilion dv9695ea and had experienced the same problem. Seems the webcam was fine when using Skype, but didn't work at all when I tried to use it on MSN and ICQ. At first I found a way to solve this problem from this forum which was to install an Acer driver. But as many of you might have noticed that the image quality wasn't as good as that when you use it on quickplay software. So I decided to reintall all the system to see what's going on cos it shouldn't be working with skype if it was a matter of compatibility issue. What I did was to check the webcam everytime after I intalled an windows update or any softwares. Finally I found that it was because of the codec that I had installed to watch all types of videos on my laptop. The one that had caused the problem was ACE Mega Codec with professional installation. When I installed the codec, the webcam went down. After I uninstalled it, the webcam came back again. So the problem must be the conflict caused by the codec. Right now I have installed two separate codecs which are Divx and Realone Alternative instead of that all in one mega codec, and so far so good. The webcam is working perfectly and I am able to watch real format videos without real player.

PS: I don't like real player and I wanna keep as less players on my system as possible. That's why I needed that all in one codec which allowed me to watch avi format and real format videos on windows player.

by mohamed_adi

dear sir

would you please direct me to the process of making chat through MSN messanger because i tried several times but still not working

by Former member

use the Microdia webcam. This is new hardware and you should be able to get proper drivers from them. It is a USB 2.0 webcam. HP is aware of the problems with the cam, but unable to solve it because they want you to use Quickplay. Look for the drivers from Microdia, where HP gets them before they add the wrapper that make Quickplay.

by nukemdomis

After I found out how to download and update HP QuickPlay, my webcam started being more reliable. No more restarting and the fustrations that accompany so many of these webcam problems.

In addition to QuickPlay, I also use a webcam software called YouCam. This program works with the most popular instant messengers...

1. Windows Live
2. Yahoo! Instant Messenger
3. AOL IM
4. Skype

Since installing YouCam, I haven't had any problems.

Remember what Zirans had said previously about start up programs that use the web cam. If you're having trouble with messages about the device already in use or anything similar make sure you set those programs to not automatically run at startup.

by tpizzamiglio

I was able to fix tthe Black screen by going into MSN /WLM selecting tools Audio and Video Setup then next on the Video setup there is a default of HP Analogue Capture. Change this to HP Webcam and you are away.

Simple but I hope it helps!

Tony

This discussion is closed to new replies.