Question Locked

HP psc 2510 Photosmart

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello Everyone,

Can someone please help me, I'm so exhausted trying to fix this printer, I've tried unplugging it a dozen times and have pressed the #key along with the number 6 key like HP suggested but the printer is still not working.

Since the power outage, the printer has a constant "hourglass".

Can someone help?

Thank you.

Sincerely,

Yvette

2 replies

by rob miners

to see if it is working.

Disconnect the printer from the PC

Go to the Control Panel and click on Add/Remove Programs. Select your Printer Software that is listed here. Select Remove.

From the Control Panel, click on Printers & Faxes. Right click the printer in question and select Delete

Look at the Toolbar. Select File, then Server Properties. Look in the Drivers tab. Highlight the printers drivers listed here and click on Remove for each one.

Reboot the PC. Do NOT reconnect the printer!

Go to the website of your printer manufacturer. Look for new XP drivers for your model. Download the correct software.

Run the exe file you just downloaded. It should auto-start the installation program

The software will tell you when to connect the printer.

Once the software is installed and the printer connected, Set the printer as the Default, try a test page. and check your notifications.

Keep us informed as to your progress if you require further assistance. ;) :D

< edited to avoid confusion >

This discussion is closed to new replies.