Most laptop power adaptors have a jack with a hole right down the centre of it. This fits over a corresponding spindle within the chassis-mounted socket on the laptop.
By far, the most used part of any laptop is the AC adaptor jack plug and socket. Each time the jack is either inserted or removed, or if the laptop is physically moved while the jack is inserted, strain is placed on this connection. Many AC adaptor jacks are moulded into a Right-Angled housing in order to attempt to relieve any exerted strain by minimising the chance of the jack brushing against any objects or other desktop cables - but from the illustrations I have seen, your jack doesn't appear to have this right-angled housing.
http://www.b2c-shopping.co.uk/m,hp,pavilion-zx5180us-hp-234235,laptop-ac-adapter/showLargePicture/
What you are experiencing is the loosening of this central spindle within the chassis AC socket and this is something that should be addressed with urgency.
You should take the laptop to a computer repair shop where they can (hopefully) strengthen the central spindle, or attempt a replacement. It all depends on whether the AC socket is fitted to the end of a trailing lead within the laptop or if it is soldered directly onto the motherboard.
Either way, if you continue to push against the seated jack plug (in order to 'make' the connection) eventually you'll have placed sufficient stress on the socket for the central spindle to sheer off completely, at which point you will no longer have [b][u]ANY[/b][/u] AC connection at all.
When the spindle does sheer off, it invariably gets stuck inside the hole in the middle of the jack plug, thereby rendering the AC adaptor unusable also, until a replacement jack plug (if you can find one) is fitted. ;)
Edited for Typo.