18 replies
by justmeangie
by mphoffar
Try extracting the files explorer.exe and shell32.dll from the cabs. Boot into a dos prompt, rename the current explorer.exe under c:\windows and shell32.dll under c:\windows\system and then copy the new ones you just extracted to their respective locations and see if that help any
Mark
by justmeangie
by justmeangie
by dcosgrove
by justmeangie
by jimjennings
by justmeangie
by zbopz
You DO NOT have to fdisk. In the bios, select the floppy as the first boot drive. If you don't have a W98 startup disk, you need to make one at someone else's machine. This will give you CDRom Support along with some other good tools.
Boot with the startup disk in the floppy drive, and rename (C:\Windows\)explore.exe to explore.old. Then you extract a fresh copy from the CD. Remember that the startup disk sets up a ram drive as (D:) so your CD drive will be one letter more thatn it was (ie. D: will become E:) The extraction tool must be run from the ROOT of C: or whichever drive contains the windows directory. The syntax is as follows using the drive letter assignments on your machine. The switches /a and /l are shown in upper case forclarification.
extract /A E:\Win98\WIN98_22\explore.exe /L C:\Windows
This will probably correct the problem.
Good Luck,
Ken
by zbopz
The syntax SHOULD read:
extract /A E:\Win98\WIN98_22.cab\explore.exe /L C:\Windows
There are spaces after extract, after /a, after explore.exe, and after /l.
by justmeangie
by flan
by justmeangie
by jasonbis
by justmeangie
by shanghai sam
by justmeangie
by justmeangie
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending