i am having checking NVRAM problem on boot. - TechRepublic
Question
February 7, 2010 at 04:19 AM
thegautamdev

i am having checking NVRAM problem on boot.

by thegautamdev . Updated 16 years, 4 months ago

I bought new motherboard a year back. From past 2-3 months my system doesnt boot properly. it shows following lines at start

AMIBIOS(C) 2005 American Megatrends, Inc.
2X-945-1512/24/08 10-55-07 Ver 1.1
CPU: Intel (R) Pentium (R) CPU 3.00 GHz
Speed: 3.00 GHz
Press DEL to run Setup
Press F11 for BBS POPUP
Initializing USB Controller.. Done
1016 OK
Auto-Detecting Sec Master.. IDE Hard Disk
Auto-Detecting Sec Slave..ATAPI CDROM
Sec Master: IC35L040AVVN07-0VA20AF1A
Ultra DMA Mode-2, S.M.A.R.T. Capable and status OK
Sec Slave: TSST CDW/DVD TS-H4S2A TB02
Ultra DMA Mode-2
Auto Detecting USB Mass storage device..
00 USB Mass storage devices found and configured
0078

and the system hangs right there, nothing happens not even keybord responds. i have to switch the system off from main supply then put it on and then sometimes it shows all the above lines but the last lines are……

00 USB Mass storage devices found and configured
checking NVRAM.. 008F

and system hangs.

again switching it on and off several times, it may start once.
please help me out

This discussion is locked

All Comments