1. Back up ALL critical files and settings.
Make sure that you can re-create all network, internet and mail account settings.
2. Enter BIOS setup, and change the boot sequence to boot from CD.
Insert the W2K CD in your drive, and Verify that you can boot from the W2K CD.
If you cannot boot from the CD, boot into Windows and run the utility on the W2K CD to create the startup floppy.
3. Boot from a W98 startup disk.
To TOTALLY wipe your hard drive,
at the DOS prompt, run
fdisk /mbr
Then, run fdisk
follow the prompts to delete your primary DOS partition.
Exit fdisk and shut down the PC.
4. Boot from the W2K CD.
Install Windows 2000.
When prompted, set up the hard drive as desired.
Chas