Discussion Locked

I want connect 2ADSL through firewall

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My company as 2 Server 2 ADSL router connection and around 150 system . 1 ADSL router is connected to firewall(watchguard firebox 700)and to server and around with 80 systems & another ADSL router connection directly to another server not with firewall and around with 70 systems . I want 2 ADSL router connection through firewall and to server, Pls help me how to connect the 2 connection through firewall .

3 replies

by wlbowers

Bring both ADSL into a Cisco router with load share.

Out of the Cisco in to the firewall.

Out of the firewall to the respective networks.

Lee

by robert.lay

Another option would be to enable one (or more depending on the license) of the interfaces on the watchguard, then plug the 2nd ADSL into that interface, you'll then need to configure the appropriate rule base to allow traffic to flow but this allow you to specify exactly what traffic flows where.

by grnathan2615

hi this nathan.i have solution for ur problem.but u may have inves for some money.
In netgear product one firewall is there it supporting dual adsl router connection with load balancing and 2 WAN gigabit port also available in future impelmetation.do u want to know this product deatils available in netgear site.u may check with netgear site.any other Networking issues and lan problem kindly let me know.
While thanking you I am sure my friend, that my desire to be of my best solution at all times

This discussion is closed to new replies.