Question Locked

IDE drives in new computers

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The computers that I recently purchased from Dell no longer have IDE connectors on the motherboards - only SATA. I would like to add drives (CD and hard drives) from older computers to the new systems, but I don't know the best way to do it. I see that there are adaptor cards for individual drives on the market, but that can get expensive for multiple drives. Can I use the a PCI IDE card with multiple IDE connectors? What are the problems with I will encounter with this setup? Windows Vista is on the computer. Does that matter?

5 replies

by thechas

Using a PCI IDE controller card "should" work, "if" you choose the right card.

When selecting cards to evaluate, read the data sheet closely.

Make sure that the card will work with optical drives. Some will only work with hard drives.

Make sure the vendor has a Vista specific driver available on their web site.

Then, it should just be a matter of installing the hardware and drivers.

Chas

by spsh27-real

Thanks for the feedback.
Do I have to worry about bus speeds? I am not very familiar with the specs I am looking at on the cards.

by hal 9000

So you don't have to worry about that but you really do have to worry about Vista Drivers for these cards as there are quite a few pieces of Hardware not listed as Vista Compatible and even those that are may not have Digital Signatures too actually run on Vista. Remember that Vista is now only 26 days old since it's release and that most of the Hardware companies where not given access tot he latest code of Vista when they started to redesign their hardware they only got the RTM code and that is quite a lot different to what ended up on the Product Release on Jan 31.

I know because I have a Volume License Copy of Vista that was purchased just after it became available and it looks nothing like what's being sold now.

Col

by bcpgm

My experience with a PCI card has been that it works on IDE HDs but not as well as on optical drives. Frequently, they become unstable. It appeared that the drives could not handle the bus speed.
My recommendation is to install a SATA DVD-RW (or others) if you need to add one.

This discussion is closed to new replies.