9 replies
by dklippert
HOW TO: Create an FTP Site in the Internet Information Manager Snap-in in Windows 2000 309007
http://tinyurl.com/sdbc
Information About the IIS File Transmission Protocol (FTP) Service 283679
http://tinyurl.com/sdbf
Also see:
HOW TO: Install and Configure a Virtual Private Network Server in Windows 2000 308208
http://tinyurl.com/sdbr
by don_c
Poster rated this answer.
by don_c
by carlos.nino
If you are just going to use this occasionally, there is a large number of free FTP clients/servers that will do the job if you do not want to mess with your server's configuration too much. You'll just have to give permissions or open ports.
Here you can find every thing you need:
http://compnetworking.about.com/cs/ftpservers/
by don_c
Poster rated this answer.
by don_c
A static ip would be the best solution of course.
You can use dhcp but then you need have access to a dns server to change the ip everytime there is a change. You will set up your connection using the dns name (ftp.mydomain.com) and when the ip changes you will change it only in the dns server (the name will always stay the same).
Leopold
by don_c
Poster rated this answer.
by don_c
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending