Discussion Locked

Incorrect Memory Size Reported in NT 4

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to make Windows NT 4.0 think more RAM is available than the BIOS says there is. I have 128 MB onboard and the BIOS sees all of it, but apparently the BIOS tells NT there is only 64 MB. Microsoft Knowledge Base article #154718, "Incorrect Memory Size Reported in Windows NT 4.0," suggests upgrading the BIOS, but that resolution path is unavailable. Thanks in advance for any suggestions.

5 replies

by e.wong

Specifying /maxmem in boot.ini can limit the amount of memory used by NT, but that is not the case here.

by e.wong

As far as I know, the BIOS has not allocated the "missing" 64 MB to any system functions or boards (e.g., video).

by thechas

Double check the BIOS setting for OS/2 support.

If this is set, the BIOS will only report 64MB to the operating system.

Chas

by thechas

Just looked at a BIOS screen today.
(been awhile since I had to go there)

On this motherboard the option was for handling memory over 64MB, the options were OS/2 or non OS/2

In advanced bios features, the specific wording was
OS select for DRAM>64MB

I have yet to see a BIOS setup that does not have an option for OS/2 / RAM above 64MB.

Chas

This discussion is closed to new replies.